Mats Bohgard
Titel
professor
Organisation
046-2228016
+46708591392
Mats [dot] Bohgard [at] design [dot] lth [dot] se
Publikationer (hämtat ur Lunds universitets publikationsdatabas)
författare
- 2013
- A Novel System for Source Characterization and Controlled Human Exposure to Nanoparticle Aggregates Generated During Gas–Metal Arc Welding
- Representative indoor nano-aerosols for a human exposure facility
- Secondary organic aerosol formation from gasoline passenger vehicle emissions investigated in a smog chamber
- 2012
- Airborne nanoparticles and their potential health effects
- DETECTION AND IDENTIFICATION OF AIRBORNE MULTI-WALLED CARBON NANOTUBES IN ARC DISCHARGE PRODUCTION
- Emission measurements of multi-walled carbon nanotube release during production
- Exposure to Diesel Particles and Traffic Noise - Health Effects Assessed in Controlled Human Laboratory Study
- Feeling homesick? Time resolved air quality measurements in residential dwellings correlated to indoor activities
- Fine Particles in a Residential Apartment
- Health Effects in Healthy Volunteers Exposed to Diesel Exhaust and Traffic Noise
- Laser Vaporizer Aerosol Mass Spectrometry for Analysis of Particle Emissions During Mantenance pf Aerosol ENP Generators
- Laser Vaporizer Aerosol Mass Spectrometry for analysis of particle emissions during maintenance of aerosol ENP generators
- Laser Vaporizer-AMS for exposure assessment and detection of airborne engineered metal nanoparticles
- Migrantarbete inom den gröna näringen
- Nanopartiklar i inomhusmiljön
- Obligatoriskt nanoregister? Nej tack!
- On-line Characterization of Aerosols from Transient Biomass Combustion
- Physical and Chemical Characterization of Biomass Burning Aerosol
- Set-up for Human Chamber Exposure Studies of Airborne Particles
- The Design of Building and Services Affects Indoor Environments and Impacts Productivity
- 2011
- Aerosol Model Nanoparticles for Protein/Biomolecule Corona Determination in Physiological Buffers - Possible Means of Determining Particle Toxicity and Fate in Humans
- Aerosol deposition of AuNP into biological fluids produce specific biomolecule corona
- Characteristics of nano-sized particles in welding workshops
- Direct deposition of aerosol generated AuNPs into biological buffers produce specific protein corona in lung-fluid and blood serum
- Effects of exposure to indoor nano-sized particles on heart rate variability
- Effects of exposure to welding fume nano-sized particles on heart rate variability in healthy welders
- Evaluation of a high temperature particle sampling setup for separation of inorganic and organic phase using laboratory model compounds
- Generation, characterisation and deposition of spherical and agglomerated
- Health Effects in Healthy Volunteers in Controlled Experimental Exposure to Diesel Exhaust and Traffic Noise
- Health Effects of Combined Exposure to Diesel Particles and Traffic Noise - a Methodology for Controlled Chamber Study
- Kvantifiering av luftkvalitet i byggnader - Slutrapport från SBUF-projekt Dnr 12042
- Laboratory evaluation of a gasifier particle sampling system using model compounds of different particle morphology
- Measurements of Deposition of Inhaled Welding Fume Particles in the Human Lung
- Methodology for Sampling and Characterizing Internally Mixed Soot-Tar Particles Suspended in the Product Gas from Biomass Gasification Processes
- Novel methodology for estimation of mass and surface area of aggregated particles deposited in the human respiratory tract
- On-line Characterization of Biomass Aerosols from Different Combustion Conditions
- Particles in Indoor Air – measurements in residential dwellings
- Particles in Indoor Air – results from residential dwellings
- Physiological effects on humans when exposed to nanometer sized airborne particles in well controlled chamber studies
- Risk Assessment for Carbon Nanotubes
- Smog Chamber Studies on SOA Formation from Gasoline Exhaust and Pure Precursors
- Soot Particle-AMS for time and composition resolved detection of engineered metal particles
- Spark generated particles for nanotoxicology studies
- Spark generated particles for nanotoxicology studies
- Workplace Measurements and Studies of Physiological Responses of Welding Fume Exposure
- 2010
- A Methodology for Assessment of Combined Effects of Particles and Noise on Humans During Controlled Chamber Exposure
- Chamber Studies of Secondary Aerosol Formation from Light Duty Vehicle Exhausts
- Effects on heart rate variability of exposure to nano-sized airborne particles
- Methodology for Assessing Associations Between Exposure to Indoor Generated Airborne Particles and Health Effects in Residential Habtitants
- Nya arbetsmiljöplanen inte långsiktigt hållbar
- On-line particle Density Measurements of Combustion Aerosols with the DMA-APM System and Comparison with Aggregation Theory
- Research on Nanotechnology and Human Health at Lund University, Sweden
- Smog Chamber Experiments of SOA Formation from Gasoline Exhaust and Light Aromatics
- Summary of Five Experimental Human Expousre Studies Investigating the Influence of Aerosol properties and Subject Characteristics on respiratory Tract Deposition
- Use of Miniaturized Aerosol Instruments on Indoor Air
- World Conference on Healthy Buildings: Airborne nanoparticles are a health risk
- 2009
- Characteristics of Welding Fume Aerosol Investigated in Three Swedish Workshops
- Chemical Health Risks
- Chemical composition and mass emission factors of candle smoke particles
- Fine and Ultrafine Particles in a Supermarket in Sweden
- Generation of Nano Size Particles from Limonene/Ozone Reactions for Controlled Human Exposures in a Chamber
- Luftburna nanopartiklar risk för hälsan
- Lund University Smog Chamber
- Mass-mobiltiy Relationship of Soot Generator and Diesel Soot
- Ozone Initiated SOA Formation of Combustion Aerrosols
- Physical Factors
- Preview on Nanoparticle Monitors
- Sorces of Indoor Air Pollution in a Survey of 3000 Swedish Dwellings
- 2008
- A Low Cost Nanoparticle Monitor for Screening Measurements in Indoor Environments
- Deposition of biomass combustion aerosol particles in the human respiratory tract.
- Fine particles in various Swedish indoor environments
- Fysikaliska faktorer
- Improvement of a Method to Measure Respiratory Tract Deposition of Ambient Aerosol on Humans - Application on Agglomerated Candle Smoke Particles
- Improvement of a Method to Measure Respiratory Tract Deposition of Ambient Aerosol on Humans - Application on Agglomerated Candle Smoke Particles
- Indoor Sources of Fine and Ultrafine Particles - Detailed Particle Characterisation in an Indoor Chamber Setting
- Kemiska hälsorisker
- Kvantifiering av luftburna partiklar och damm i byggnader - Slutrapport för SBUF-projekt 11652, Feb 2008
- Lung deposited surface area concentration and particle size distribution in welding fumes measured in real workplaces with high time resolution
- Method for exposure chamber studies to examine effects on humans of airborne nanoparticles from welding and burning candles
- Methodology for Examination of Respiratory and Cardiovascular Effects of Airborne Nanoparticles Abundant in Indoor Environments
- Particle Size Distribution and Lung Deposited Surface Area Concentration in Welding Fumes Measured in Real Workplaces with High Time Resolution
- Properties and toxicological effects of particles from the interaction between tyres, road pavement and winter traction material
- Reflektioner från lärare
- Sources of Fine Particles in a Residential Apartment
- Sources of Indoor Air Pollution in a Survey of 3000 Swedish Dwellings
- Welding Fume Generation for Controlled Human Exposures Studies in Chamber - Comparison with Detailed Work Place Measurements
- 2007
- Avslutningsord från handledarna
- Luftens partiklar påverkar sjuklighet och dödlighet
- Methodology for identifying particle sources in indoor environments
- Particles in various Swedish indoor environments: size distributions, number and mass concentrations
- Perspektiv på kunskapstillväxt inom arbetslivet
- Physical and Chemical Properties of Fine Particles Emitted from Candles
- Respiratory tract deposition measurements of aerosol particles with on-line techniques; review of sources of error and estimation of their impact
- 2006
- A New Chamber Set-Up For Studies of Health Effects, Respiratory Deposition and Characteristics of Biomass Combustion Aerosols
- A new chamber set-up for studies of health effects, respiratory deposition and characteristics of biomass combustion aerosols
- A set-up for field studies of respiratory tract deposition of fine and ultrafine particles in humans
- Controlled Human Chamber Exposure Studies of Biomass Combustion Aerosols
- Design and Evaluation of a Chamber Set-up for Controlled Human Exposure Studies of Biomass Combustion Aerosols
- Luftens partiklar dödar
- Methodology for studies on respiratory and cardiovascular effects of humans at occupational exposure to airborne nanoparticles
- Nanopartiklar - positiv utveckling eller nytt miljöhot
- Size-Resolved Emission Factor for Particle generation Caused by Studded Tires - Experimental Results
- Traffic-generated emissions of ultrafine particles from pavement-tire interface
- 2005
- A Set-up for Field Studies of Respiratory Deposition in Humans
- A setup for field studies of total deposition of polydisperse aerosol in the human airways
- Aerosol formation and effect in biomass combustion and gasification
- Airborne particle deposition onto the ocular surface
- Arbetsmiljöer inom Kommunal
- Dust in Buildings - A Method for Identifying Particle Sources
- Emissions of Coarse Particles from Traffic Caused by Studded Winter Tires
- Evaluation of aerodynamic particle sizer and electrical low-pressure impactor for unimodal and bimodal mass-weighted size distributions
- Fine and ultrafine particles from combustion sources – Investigations with in-situ techniques
- Fysikaliska faktorer
- Hygroscopic behavior of aerosol particles emitted from biomass fired grate boilers
- In-situ Characteristics of Particle emissions from three indoor combustion sources
- In-situ characteristics of particle emissions from biomass combustion.
- Metal Distribution in particles from Grate Combusttion of Woody Fuels
- Method for identifying particle sources in buildings
- On-Line Characterisation of Particle Emissions from Indoor Combustion Sources
- Particle emissions from district heating units operating on three commonly used biofuels
- Respiratory Deposition of Fine and Ultrafine Particles in Indoor Air
- 2004
- A Way to Estimate and Correct for Fractal Dimension of Hygroscopic Growth Data
- Boiler Operation Influence on the Emission of Submicron Particles and PAHs from Biomass Fired Grate Boilers
- CHEMICAL CHARACTERISTICS OF FINE PARTICLES FROM COMBUSTION OF BIOFUELS
- Chemical Characterisation of Fine Particles from Combustion of Biofuels
- Detergent residues – A major contribution to respirable fraction in indoor air?
- Förändring av kursen Människan och teknologin för första årskursen i Infocomprogrammet
- In-situ characteristics of particle emissions from biomass combustion
- Introduktion
- Laboratory and field test of a sampling method for characterization of combustion aerosols at high temperatures
- On-Line Charracterisation of Indoor Combustion Sources - Chamber Studies of Particle Volatility and Hygroscopicity
- Particle Emissions from Vehicle Tires
- Particle Formation in Moving Grate Boilers fired with wood fuels
- RESPI – A setup for field studies of total deposition of polydisperse aerosol in the human airways
- The Effect of Sampling Temperature on the Determined Efficiency of an Electrostatic Percipitator after a 12 MW Biomass Fired Boiler
- Traffic Generated Ultra Fine Particles Emitted from the Tire-Pavement Interface
- 2003
- 'EUROPART'. Airborne particles in the indoor environment. A European interdisciplinary review of scientific evidence on associations between exposure to particles in buildings and health effects
- A way to estimate and correct hygroscopic growth data for fractal dimension
- Characteristics of aerosol particles formed during grate combustion of moist forest residue
- Hygroscopic Behaviour of Flue Gas Particles Emitted from a 1.5 MW Biomass Fired Grate Boiler
- Intercomparison of ELPI and APS for coarse, fine and bimodal particle mass weighted size-distributions
- Method for Characterisation of Fly Ash Particles at High Temperatures
- Metod för bestämning av mängden torium i människa genom mätning av 220Rn i utandningsluften
- Particle Emissions from Biomass Combustion
- Particle Emissions from Biomass Fired Grate Boilers
- Particulate Organic and Elemental Carbon Emitted during Combustion of Three Commonly Used Biofuels
- Pedagogisk förändring av arbetsvetenskapskurser i några olika utbildningsprogram vid LTH
- Using Polydisperse SMPS Samples for Fast Determination of Respiratory Deposition in Humans - Influence of Small Size-Shifts Between the Inhaled and Exhaled Sample
- Using polydisperse SMPS samples for fast determination of respiratory deposition in humans – influence of small size-shifts between the inhaled and exhaled sample
- 2002
- A New Method for Sampling of Reactive Compounds in Airborne Submicrometer particles Using a Condensing Agent
- Aerosol Measurement in Indoor Air Health Effect Studies
- Aerosol Measurements in Indoor Air Health Effect Studies
- Aerosol Sampling Device for High Temperature Characterisation of Biomass Combustion Aerosols
- Experimental Studies on Particle Emissions from Grate Fired Biomass Combustion Boilers
- Fly ash penetration through electrostatic precipitator and flue gas condenser in a 6 MW biomass fired boiler
- Implantation Probability of 214-Pb in Glass: Experiments in a Wind Tunnel
- Intercomparison of SMPS; ELPI and APS 3320 during Sampling of Particles Emitted from a Domestic Wood Pellet Burner
- On the Implantation of 214-Pb in Glass: Deposition of Radon Progeny, Implantation of 214-Pb in Glass and Cleaning Glass Surfaces
- Particle Emissions from Biomass Combustion in Grate Fired Boilers Operating on Forest Residues and Sawdust
- Verification of a Set-Up for Measurements of Environmental Fine and Ultrafine Particle Respiratory tract Deposition in Humans
- 2001
- A Set-Up for Field Measurements of Fine and Ultrafine Particle Respiratory Tract Deposition in Humans
- Aerosol Particles Emitted from a 1 MW Biomass Combustion Unit
- Characterisation of Particle Emission from a Commercially Operated 1MW Biomass Fired Boiler
- Characterization of Thermally Generated Aerosols from Polyurethane Foam.
- Dålig utbildning ger dålig miljö
- Hygroscopic Properties of Aerosol Particles Emitted from a 1 MW Biomass Combustion Unit
- Investigation of Aerosol Formation and Cleaning Efficiency in Commercially Operated Biomass Fired Boilers
- Lär tekniker arbetsmiljö
- Particle Emissions from Biomass Combustion in 1 and 6 MW Boilers
- 2000
- 1999
- 1998
- 1997
- A Novel Three-Stage Radon Progeny Sampler
- Air Pollutants
- Airborne particle Deposition on the Ocular Surface. Role of Thermophoresis and Settling
- Deposition of Airborne Particles onto the Human Eye - Wind Tunnel Studies of the Deposition Velocity onto the Eyes of a Mannequin
- Impinger Samplers Underestimate Exposure of Toxic Air Pollutants
- 1996
- 1995
- 1994
- A Semiempirical model for Particle Deposition onto Facial Skin and Eyes. Role of Air Currents and Electric Fields
- Aerosol Properties and Unattached Fraction of Radon Daughters Close to the Human Face
- Aerosoler
- Fysikaliska faktorer
- NOSA Aerosolsymposium Lund 20-21 oktober 1994
- Source Characteristics of Emitted Aerosol in the Size Range 0,02 to 10 µm at Pigment Handling in Dye Manufacturing
- 1993
- Characteristics of Particles Emitted from Mechanical Handling of Fibrous Materials
- Collection Characteristics of a Multi-jet Impactor for Deposition of Sub-Micron Particles
- Deposition of Airborne Particles onto the Human Eye
- Deposition of Particles onto Facial Skin and Eyes. Role of Air Currents and Electric Fields
- Particle Emission at Friction and Bending of Fibre Rowings and Yarns
- Partikeldeponering i öjnene
- Work Environment Related Aerosol Research in the Nordic Countries
- 1992
- Characteristics of a Multi-Jet Impactor with 50 Micrometer Diameter Nozzles for Deposition of Submicron Particles
- Determination of Particle Deposition Velocity Onto the Human Eye
- Determination of Particle Deposition Velocity onto the Human Eye
- FIFi: The Simulation of Dendrite Formation of Aerosol Particles on a Single Fibre
- FiFi: Simulation of Dendrite Formation of Aerosol Particles on a Single Fibre
- Particle Deposition on the Human Eye
- Report of Project 04, Contract B17-047 of the CEC Radiation Protection Research Programme (1990-1992)
- The Dendritic Formation of Aerosol Particles on a Single Fibre: Experiments and Simulations
- The Effects of Thermal Convection Flow on Aerosol Properties and Unatached Fraction of Radon Daughters Close to the Human Face
- 1991
- A Large-Scale Experimental Facility for Studying the Interaction Between Radon Daughters and Airborne Particles in Dwellings
- Experimental Determination of Particle Deposition onto the Human Eye
- Particle Size Calibration between the Aerodynamic Particle Sizer and Optical Microscope for Wind Tunnel Studies with Particles of Fused Alumina
- Rapport från forskningscirkel vid metallklubben PLM-Fosie
- Status Report of Project 4, Contract Bi7-047 of the CEC Radiation Protection Research Programme
- 1990
- A Full-Scale Experimental Set-Up for Determining Relevant Parameters for Radon Daughter Behaviour in Dwellings
- A Method for the Characterization of the Aerosols Emitted from Handling of Dye Pigments in the Paint Manufacturing Industry
- An Experimental Facility to Simulate Radon-Progeny Behavior in Dwellings
- Characterizations of Aerosols Emitted from Handling of Dye Pigments in the Paint Manufacturing Industry
- Metodik för karakterisering i vindtunnel av aerosolprovtagning med personburen utrustning
- Multi-Jet Impactor with 50 Micrometer Diameter Nozzles for Uniform Deposition of Submicron Particles
- Textila slangfilters egenskaper och funktion
- 1989
- 1988
- Aerosolforskning på arbetsmiljöområdet
- Aerosols from Thermal Spraying Operations with Materials Containing Chromium and Nickel
- Arbetsmiljö vid termisk ogräsbekämpning
- Determination of Sampling Characteristics of Personal Samplers
- Metodik för utveckling och kontroll av personburen utrustning för provtagning av partikulära luftföroreningar
- Multi-jet Impactor with 50-micrometer Diameter Nozzles for Uniform Deposition of Submicron Particles
- Nya provtagare för partikulära luftföroreningar
- 1987
- 1986
- 1985
- 1984
- Bronkocancerogena egenskaper hos rök från svetsning i kromhaltigt stål och termisk sprutning med kromhaltigt material
- Calibration procedure for particle Elastic Scattering Analysis of Thin Samples
- PIXE Detection Limits for some Aerosol Collection Substrates by Excitation with protons and 4He2+ Ions from a 3 MV Tandem Accelerator
- 1983
- A Study of Indoor Aerosol Size Distribution and Attachment of Radon Daughters
- Characteristics of Aerosols Containing Chromium and Nickel From Some Thermal Spraying Operations
- Ny personburen provtagare för aerosoler i arbetsmiljö
- On the Application of Elastic Scattering Analysis as a Complement to PIXE for the Determination of Light Elements in Thin Aerosol Samples
- Particle Elastic Scattering Analysis of Thin Samples with Protons ad He-ions from a 3 MV Electrostatic Accelerator
- Performance of a Personal Low-Weight Aerosol Sampler with Particle Size Fractionation and Time Resolution
- Personburen provtagare för tids- och storleksfraktionering av aerosoler i arbetsmiljö
- 1982
- 1981
- A Personal Aerosol Sampler with Size Fractionation and Time Resolution, Extended abstract
- Characteristics of Welding Fumes
- Elemental Concentrations in Airborne Particles from Welding and Metal Spraying Operations
- Forskning och utveckling med anknytning till arbetsmiljö inom och kring programmet för Teknisk Hygien i Lund
- Generering av monodispersa aerosoler med hjälp av en "electrostatic classifier"
- Kontinuerliga tvåfraktionsinsamlare för övervakning av partikulära luftföroreningar i arbetsmiljö
- MeV Protons for the Characterization of Aerosols in Work Environments
- Miljöanalys med hjälp av kärnfysikalisk teknik - PIXE
- 1980
- Krom- och nickelemission vid termisk sprutning
- Krom- och nickelemission vid termisk sprutning
- Luftföroreningar vid svetsning - karakterisering av svetsrök
- Luftföroreningar vid svetsning -karakterisering av svetsrök
- PIXE-metoden för analys av arbetmiljöaerosoler
- PIXE-metoden för analys av arbetsmiljöaerosoler
- 1979
- Aerosolsammansättning i ett renluftsområde
- An Analytical Procedure for Determining Chromium in Samples of Airborne Dust
- Analys av svetsrök med avseende på fluor och krom
- Analyser av aerosoler i ytte miljö med PIXE och PESA
- Characterization of Work Environment Aerosols by PIXE
- Krom och nickelemission vid termisk sprutning
- PIXE Analysis of Environmental Samples
- Systematisk undersökning av röken från olika svetsmetoder
- 1978
- Aerosolforskning inom PIXE-gruppens program för teknisk hygien
- Characterization of Welding Aerosols at the PIXE Laboratory in Lund
- Karakterisering av svetsrök - en lägesrapport över svetsprojektet i Lund
- Luftföroreningar vid svetsning
- Particle-Induced X-Ray Emission: A Useful Analytical Method
- Trace Elemental Analysis by Means of Heavy Particle-Induced X-Rays
- 1977
- 1976
redaktör
- 2011
- A Growing Professionalism Within The Global File Sharing Community
- Aerosol Model Nanoparticles for Protein/Biomolecule Corona Determination in Physiological Buffers - Possible Means of Determining Particle Toxicity and Fate in Humans
- Experience from an Action Oriented Research Intervention at an Operating Unit - A view from the road
- Extreme Weather Events and Their Implications for Occupations
- From analogue to digital: the skeumorphs and metaphors we use
- Health Effects in Healthy Volunteers in Controlled Experimental Exposure to Diesel Exhaust and Traffic Noise
- Measurements of Deposition of Inhaled Welding Fume Particles in the Human Lung
- Old People at Work - A Proposal for a Systematic Review of Knowledge for Further Research
- Poster: Usage of the WHO Surgical Safety Checklist - Analysis of Compliance with a Safety Intervention and Posssible Improvements
- Psychosocial work, burnout and attitudes among police officers
- Response Patterns in Finger and Central Body Skin Temperatures Under Mild Whole Body Cooling
- Risk Assessment for Carbon Nanotubes
- The Predicted Heat Strain Model (ISO7933) Severely Over- or Underestimated Core and Skin Temperature in Protective and Light Summer Clothing
- The Visual Environment in an Operating Theatre at a Hospital
- The Work Environment - Impact of Technological, Social and Climate Change
- Understanding Maritime Safety Culture and its Possible Implications for Practice
- Ventilated evaporative cooling as a preventive measure when confronted with a hot climate
- Visualization of Maritime Safety Culture - Development and Evaluation of an Interactive Learning Tool
- Work in Heat: Ventilation Solutions in Clothing
- Workplace Measurements and Studies of Physiological Responses of Welding Fume Exposure
- 2009
- 2008
- 2005
- 2004
- 1994
