Bengt Sundén
Titel
Professor, Prefekt
Organisation
046-222 86 05
070-687 59 31
Bengt [dot] Sunden [at] energy [dot] lth [dot] se
Publikationer (hämtat ur Lunds universitets publikationsdatabas)
författare
- 2013
- 3D modeling of an anode supported SOFC using FEM and LBM
- A performance analysis of porous graphite foam heat exchangers in vehicles
- Convective vaporization in micro-fin tubes of different geometries
- Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger
- Grading the amount of electrochemcial active sites along the main flow direction of an SOFC
- Numerical Predictions of the Flow and Thermal Performance of Water-Cooled Single-Layer and Double-Layer Wavy Microchannel Heat Sinks
- On continuum models for heat transfer in micro/nano-scale porous structures relevant for fuel cells
- SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants
- Teknikbevakning av stationära fastoxidbränsleceller (SOFC) 2012
- 2012
- A numerical investigation of heat transfer in a smooth bend part of a u-duct
- Analysis of Flow and Thermal Performance of a Water-Cooled Transversal Wavy Microchannel Heat Sink for Chip Cooling
- Comparison Of Continuous And Truncated Ribs On Internal Blade Tip Cooling
- Computational analysis of the influences of guide ribs/vanes on enhanced heat transfer of a turbine blade tip-wall
- Endwall convective heat transfer for bluff bodies
- Experimental Study of Endwall Heat Transfer in a Linear Cascade
- Fabrication Process Simulation of a PEM Fuel Cell Catalyst Layer and Its Microscopic Structure Characteristics
- Foam Heat Exchangers: A Technology Assessment
- Heat Transfer Research in Sweden: Historical and Current Activities
- Influence of Different Rim Widths and Blowing Ratios on Film Cooling Characteristics for a Blade Tip
- Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model
- Logarithmic Mean Pressure Difference-A New Concept in the Analysis of the Flow Distribution in Parallel Channels of Plate Heat Exchangers
- Numerical Investigation of Convective Heat Transfer and Pressure Drop for Ribbed Surfaces in the Bend Part of a U-Duct
- Numerical Predictions of Pressure Drop and Heat Transfer in a Blade Internal Cooling Passage with Continuous/Truncated Ribs
- Preface: International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control
- Process Based Large Scale Molecular Dynamic Simulation of a Fuel Cell Catalyst Layer
- Review of microstructure modeling in solid oxide fuel cell electrodes
- SOFC Modeling Considering Electrochemical Reactions at the Active Three Phase Boundaries
- SOFC Modeling at the Cell Scale including Hydorgen and Carbon Monoxide as Electrochemically Active Fuels
- The effect of heat transfer on the polarizations within an intermediate temperature solid oxide fuel cell
- Transport phenomena in solid oxide fuel cell electrodes focusing on heat transfer related to chemical reactions
- VOF MODELING AND ANALYSIS OF FILMWISE CONDENSATION BETWEEN VERTICAL PARALLEL PLATES
- 2011
- Analysis of Microscopic Anode Structure Effects on an Anode-Supported SOFC Including Knudsen Diffusion
- Analysis of anisotropic transport in the polymer electrolyte membrane fuel cells and effect on performance
- Analysis of multi-phase transport phenomena with catalyst reactions in polymer electrolyte membrane fuel cells - A review
- Analysis of multiphase tranport phenomena in PEMFCs by incorporating microscopic model for catalyst layer structure
- Augmented Heat Transfer of an Internal Blade Tip by Full or Partial Arrays of Pin-Fins
- CFD Modeling: Different Kinetic Approaches for Internal Reforming Reactions in an Anode-Supported SOFC
- Comparative Analysis of Different Renewable Fuels for Potential Utilization in SOFCs
- Comparisons of Heat Transfer Enhancement of an Internal Blade Tip with Metal or Insulating Pins
- Comparisons of Pins/Dimples/Protrusions Cooling Concepts for a Turbine Blade Tip-Wall at High Reynolds Numbers
- Conjugated Analysis of Heat Transfer Enhancement of an Internal Blade Tip-wall with Pin Fin arrays
- Control of jet impingement heat transfer in crossflow by using a rib
- Convective heat transfer and fluid flow physics in some ribbed ducts using liquid crystal thermography and PIV measuring techniques
- Dynamic Temperature Simulation in District Heating Systems in Denmark Regarding Pronounced Transient Behaviour
- Effects Of Ribs On Internal Blade-Tip Cooling
- Heat Transfer Characteristics of an Impinging Jet in Crossflow
- Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
- Modeling Validation and Simulation of an Anode Supported SOFC including Mass and Heat Transport, Fluid Flow and Chemical Reactions
- Numerical quantification of water saturation, back diffusion, electro-osmotic drag and water generation in polymer electrolyte membrane fuel cells
- On Flow Maldistribution in PEMFC Stacks
- Parametric study on heat transfer enhancement and pressure drop of an internal blade tip-wall with pin-fin arrays
- Predictions of Enhanced Heat Transfer of an Internal Blade Tip-Wall With Hemispherical Dimples or Protrusions
- Review of Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes
- Review on the Properties of Nano-/Microstructures in the Catalyst Layer of PEMFC
- SOFC modeling considering electrochemical reactions at the TPBs
- Simulation of alternative fuels for potential utilization in solid oxide fuel cells
- Water saturation modeling in polymer electrolyte membrane (PEM) fuel cells using a validated approach
- 2010
- A theoretical study on the heat transfer process in diesel engines
- An Experimental Study of Heat Transfer and Pressure Drop on the Bend Surface of a U-duct
- Analysis and Modeling of Novel Low-Temperature SOFC With a Co-Ionic Conducting Ceria-Based Composite Electrolyte
- CFD Modeling Considering Different Kinetic Models for Internal Reforming Reactions in an Anode-Supported SOFC
- Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes
- Comparative Analysis of Different Renewable Fuels for Potential Utilization in SOFCs
- Computational Analysis of Pin-Fin Arrays Effects on Internal Heat Transfer Enhancement of a Blade Tip Wall
- Conjugate Heat Transfer Enhancement Of An Internal Blade Pin-Finned Tip-Wall
- Development of Multi-scale Models for Transport Processes Involving Catalytic Reactions in SOFCs
- Dynamic Modeling Of A Solid Oxide Fuel Cell System In Modelica
- EFFECTS OF SHALLOW-ANGLE JET IMPINGEMENT AND FREE STREAM VELOCITY ON HEAT TRANSFER
- Gas Turbine Blade Tip Heat Transfer and Cooling: A Literature Survey
- Heat Transfer and Pressure Drop Under Dry and Humid Conditions in Flat-Tube Heat Exchangers With Plain Fins
- Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
- Numerical predictions of augmented heat transfer of an internal blade tip-wall by hemispherical dimples
- On Modeling of Heat and Mass Transfer and other Transport Phenomena in Fuel Cells
- On numerical simulations of flow and heat transfer of the bend part of a U-duct
- PIV MEASUREMENTS OF TURBULENT FLOW IN A CHANNEL WITH SOLID OR PERFORATED RIBS
- Predictions of Enhanced Heat Transfer of an Internal Blade Tip-Wall with Hemishperical Dimples or Protrusions
- Review on Modeling Development for Multiscale Chemical Reactions Coupled Transport Phenomena in Solid Oxide Fuel Cells
- Simulation of Multiphase Transport Phenomena in PEMFC Involving Water Phase Change
- Simulation of compact heat exchanger performance
- Study On Catalytic Reactions In Solid Oxide Fuel Cells With Comparison To Gas Phase Reactions In Internal Combustion Engines
- Turbulent flow in a ribbed channel: Flow structures in the vicinity of a rib
- Visualization of diffusion and convection heat transport in a square cavity with natural convection
- 2009
- An Experimental Study of Liquid-Phase Heat Transfer in Multiport Minichannel Tubes
- Analysis of Flame Radiative Heat Transfer Using Large Eddy Simulation
- Analysis of parameter effects on chemical reaction coupled transport phenomena in SOFC anodes
- Augmented Heat Transfer Of An Internal Blade Tip Wall With Pin-Fins
- CFD approach analysis of chemical reactions coupled convective heat transfer in reformer ducts
- Effect of Pin Base-Fillet on Heat Transfer Enhancement of an Internal Blade Pin-Finned Tip-Wall
- Energy-efficient flat-tube heat exchangers for indirectly cooled display cabinets
- Enhanced Internal Heat Transfer on the Tip-Wall in a Rectangular Two-Pass Channel (AR=1:2) by Pin-Fin Arrays
- Estimation of Thermal Networks Using Singular Value Decomposition Method
- Identification and analysis of vortical structures in a ribbed channel
- LTNE approach and simulation for anode-supported SOFCs
- LTNE approach to simulate temperature of cathode in a PEMFC
- Large Eddy Simulation of Strongly Radiating Flame in a Compartment Fire
- Numerical simulation of multi-scale transport processes and reactions in pem fuel cells using two-phase models
- Parametric study and multiple correlations on air-side heat transfer and friction characteristics of fin-and-tube heat exchangers with large number of large-diameter tube rows
- Performance predictions of laminar and turbulent heat transfer and fluid flow of heat exchangers having large tube-diameter and large tube-row by artificial neural networks
- Pressure Drop in Multi-Parallel Channels of Corrugated Plate Steam Condensers
- SOFC Modeling Considering Internal Reforming by a Global Kinetics Approach
- Topological structures of a separation bubble in a ribbed channel
- Turbulent flow in a ribbed channel analysed by the proper orhtogonal decomposition
- 2008
- Advanced Computational Methods and Experiments in Heat Transfer X
- Analysis of chemical reacting heat transfer in SOFCs
- Application of a genetic algorithm for thermal design of fin-and-tube heat exchangers
- Artificial neural networks-based correlating heat transfer and friction of three kinds of heat exchnagers having large tube diameter and large tube-row
- CFD analysis of two-phase flow and convective heat transfer in PEMFC ducts
- CFD approach for chemical reaction coupled heat transfer in SOFC channels
- Chemical reacting transport phenomena and multiscale models for SOFCs
- Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls
- Evaluation of approaches for modeling temperature wave propagation in district heating pipelines
- Evaluation of weighted sum of grey gases coefficients for combustion gases using predicted emissivities from high resolution spectroscopic databases
- Influence of flow maldistribution on the pressure drop and water condensation in a 100 kw PEM fuel cell stack
- Investigation of radiative heat transfer in fixed bed biomass furnaces
- Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers
- Numerical investigation of two-phase aqueous foam flow for heat exchanger applications
- Numerical simulation of fluid flow in a monolithic exchanger related to high temperature and high pressure operating conditions
- Optimization of Compact Heat Exchangers by a Genetic Algorithm
- Pecularities of heat transfer from in-line tube bundles to upward aqueous foam flow
- Species and temperature distribution in cathode of PEMFC
- Steam condensation in parallel channels of plate heat exchangers- an experimental investigation
- Thermal Engineering Aspects in Power Systems
- Thermal radiation and effects on transport processes in solid oxide fuel cells
- Transport Phenomena in Fires
- Water condensation and two-phase flow modeling for a plate heat exchanger channel
- 2007
- A new low Reynolds stress transport model for heat transfer and fluid in engineering applications
- A new low Reynolds stress transport model for heat transfer and fluid in engineering applications
- A parametric analysis of flow maldistribution and consequences on the thermal performance of plate heat exchangers
- Advances in Compact Heat Exchangers
- Analysis of Parameter Effects on Transport Phenomena in Conjunction with Chemical Reactions in Ducts Relevant for Methane Reformers
- Analysis of chemical-reaction-coupled mass and heat transport phenomena in a methane reformer duct for PEMFCs
- CFD Approach to Analyze Transport Phenomena Coupled Chemical Reactions Relevant for Methane Reformers
- CFD-analysis of fully developed turbulent flow and heat transfer in a unitary cell of a cross corrugated plate pattern heat exchanger
- Computational fluid dynamics in research and design of heat exchangers
- Computational fluid dynamics in research and design of heat exchangers
- Computational heat transfer in heat exchangers
- Experimental investigation of local heat transfer in a square duct with various-shaped ribs
- Experimental investigation on port to channel flow maldistribution in plate heat exchangers
- Experimental investigation on port-to-channel flow maldistribution in plate heat exchangers
- Heat transfer and heat exchangers
- Heat transfer in food processing - recent developments and applications
- High temperature heat exchangers
- Influence of pressure drop in PEM fuel cell stack on the heat and mass balances in 100 KW systems
- Large eddy simulation for resolution of heat transfer problems
- Liquid side heat transfer and pressure drop in finned-tube cooling-coils operated with secondary refrigerants
- Liquid side heat transfer and pressure drop in finned-tube cooling-coils operated with secondary refrigerants
- Mathematical modeling and numerical simulation of fires
- Modelling temperature dynamics of a district heating system in Naestved, Denmark - A case study
- Numerical Simulation of Fluid Flow in a Monolithic Exchanger Related to High Temperature and High Pressure Operating Conditions
- PIV measurement of separated flow in a square channel with streamwise periodic ribs on one wall
- Plate Heat Exchangers: Design, Applications and Performance
- Prediction of temperature propagation in a pipe-network employing turbulence modeling
- Simulation of Heat Transfer and Effects on Reaction-Coupled Transport Processes in SOFCs
- Steam condensation in parallel channels of plate heat exchangers-an experimental investigation
- Thermal analysis of a heat recovery system for externally fired micro gas turbines
- Transport Phenomena Coupled by Chemical Reactions in Methane Reforming Ducts
- Transport Phenomena in Fires
- 2006
- A conjugate heat transfer model for heat load prediction in combustion devices
- A conjugate heat transfer model for heat load prediction in combustion devices
- Advanced Computational Methods in Heat Mass Transfer IX
- An experimental investigation of the port flow maldistribution in small and large plate package heat exchangers
- Analysis of Water Condensation and Two-phase Flow in a Channel Relevant for Plate Heat Exchangers
- Analysis of chemically reacting transport phenomena in an anode duct of intermediate temperature SOFCs
- Computational heat transfer in research and design of heat exchangers
- Dynamic Analysis of an O2 Separating Membrane Reactor for CO2-Emission-Free Power Processes
- Dynamic analysis of an O2 separating membrane reactor for CO2-emission free power processes
- Dynamic performance of district heating system in Madumvej, Denmark
- Effect of free-stream turbulence on heat transfer and fluid flow in a transonic turbine stage
- Effect of freestream turbulence on heat transfer and fluid flow in a transonic turbine stage
- Effects of particles on radiative heat transfer in biomass combustion systems
- Engine knock prediction using multi zone model for spark ignition engines
- Experimental investigation of flow fields in a square channel roughened with various ribs on one wall
- Experimental investigation of flow fields in a square channel roughened with various ribs on one wall
- Experimental investigation of flow fields in a square channel roughened with various ribs on one wall
- Heat transfer modelling in double pipes for domestic hot water systems
- Modeling and Analysis Approaches for PEMFCs
- Modeling and Dynamic Analysis of CO2-Emission Free Power Processes in Modelica using the CombiPlant Library
- Modeling and dynamic analysis of CO2 emission free power process in Modelica using CombiPlant Library
- Modelling temperature dynamics of a district heating system in Naestved, Denmark – a case study
- Natural convection heat transfer from a thermal heat source located in a vertical plate fin
- Numerical investigation of turbulent heat transfer in a rectangular-sectioned 90 degrees bend
- Numerical prediction of of heat transfer and fluid flow in a transonic turbine stag
- Numerical simulation of unsteady fluid flow and heat transfer in a transonic turbine stage
- Numerical simulations of heat transfer and fluid flow for a rotating high-pressure turbine
- Numerical simulations of unsteady fluid flow and heat transfer in a transonic turbine stage
- Performance of plate heat exchangers for evaporation of ammonia
- Thermal analysis of plate condensers in presence of flow maldistribution
- Thermal analysis of plate condensers in presence of flow maldistribution using refrigerant R134a
- Turbulent flow and heat transfer in a square-sectioned U-bend
- Various Transport Phenomena and Modeling in a Methane Reformer Duct for PEMFCs
- Velocity and heat transfer measurements in a square channel with a ribbed wall
- Water recovery schemes and effects on the water/thermal balances for a 100 KW PEMFC system
- 2005
- A numerical,and experimental investigation of the slot film-cooling jet with various angles
- A parametric analysis of flow maldistribution and consequences on the thermal performance of plate heat exchangers
- An experimental and theoretical investigation of the effect of flow maldistribution on the thermal performance of plate heat exchangers
- An experimental investigation of the port to channel flow pressure distribution of the smaller and larger plate package heat exchangers
- Analysis of compact heat exchangers as an intercooler in pemfc systems
- Analysis of developing and fully developed turbulent flow and heat transfer in a square-sectioned U-bend duct
- Analysis of intermediate temperature solid oxide fuel cell transport processes and performances
- CFD in design and development of heat exchangers
- Computational Analysis of Gas Flow and Heat Transport Phenomena in Monolithic Structures for High Temperature Processes
- Computational analysis of heat transfer enhancement in square ducts with V-shaped ribs: Turbine blade cooling
- Computational heat transfer in heat exchanger analysis and design
- Development of SOFC Modeling and Analysis
- Effects of various reactions on the gas flow and heat transfer in an anode duct of ITSOFCS
- Experimental investigation of local heat transfer in a square duct with continuous and truncated ribs
- Experimental investigation of the effect of rib shape on local heat transfer in a square duct by means of liquid crystal thermography
- Experimental study on port to channel flow distribution of plate heat exchangers
- Gas flow and heat transfer with internal reforming reactions in an anode duct of SOFCs
- Heat and mass balances of an intercooler in PEM Fuel Cell systems
- High temperature heat exchangers
- Modeling and Simulation of Turbulent Heat Transfer
- Modeling of various transport processes in a natural gas reformer
- Numerical investigation of the drying process of silica gel in supercritical carbon dioxide
- On Heat and Mass Transfer Phenomena in PEMFC and SOFC and Modeling Approaches
- On RANS-based models for prediction of turbulent flow and heat transfer in ribbed ducts
- Performance of a pressure-based unstructured code and a multi-block structured code for heat transfer and fluid flow
- Simulation of heat transfer from swirling impinging jets
- Transient response of plate heat exchangers considering effect of flow maldistribution
- Transport Phenomena in Fuel Cells
- 2004
- A Numerical Investigation of Heat Transfer and Gas Flow in Proton Exchange Membrane Fuel Cell Ducts by a Generalized Extended Darcy Model
- A low-re RSTM model for computations of heat transfer and fluid flow for impingement and convective cooling
- A numerical investigation of tip leakage heat transfer and fluid flow for a gas turbine rotor blade
- A study on turbulent flow characteristics in ducts of relevance for heat exchangers
- Advanced Computational Methods in Heat Transfer VIII
- Advances in numerical modeling of heat exchanger related fluid flow and heat transfer
- An experimental investigation of heat transfer and fluid flow in a rectangular duct with broken V-shaped ribs
- Analysis of an extended ionization equilibrium in the post-flame gases for spark ignited combustion
- Analysis of intercooler in pem fuel cell systems
- Computation of combined turbulent convective and impingement heat transfer
- Computation of combined turbulent convective and impingement heat transfer
- Computational analysis of an O<SUB>2</SUB>separating membrane for a CO<SUB>2</SUB>-emission-free power process
- Development of a simulation method for transient response of fluid flow in pipes
- Direct simulation Monte Carlo of gaseous flow and heat transfer in a microchannel
- Effects of inclination angle of ribs on the flow behavior in rectangular ducts
- Experimental investigation of local heat transfer in a square duct with continuous and truncated large ribs
- Heat transfer analysis of turbulent flow in rectangular-sectioned curved ducts
- Heat transfer and flow characteristics of a shrouded fin array
- Large eddy simulation of natural convection along a vertical isothermal surface
- Large eddy simulation of natural convective heat transfer along a vertical isothermal surface
- Marine applications of fuel cell technology
- Modeling and analysis of A bio-fuelled ceramic fuel cell stack
- Modeling of the absorption coefficient in the exponential wide band model (EWBM)
- Numerical Simulation of Integrated PEMFC Stack
- Numerical analysis of heat transfer and gas flow in PEM fuel cell ducts by a generalized extended Darcy model
- Numerical analysis of turbulent convective heat transfer processes in a square-sectioned U-bend ducts
- Numerical simulation of two-phase flow and heat transfer with and without phase change using a volume-of-fluid model
- Numerical simulation of two-phase flow using a volume-of-fluid model with various interface reconstruction schemes
- Numerical simulation of two-phase fluid flow and heat transfer with or without phase change using a volume-of-fluid model
- On heat load caculations in gas turbine combustors
- On heat load calculations in gas turbine combustors
- On prediction of tip leakage flow and heat transfer in gas turbines
- On prediction of tip leakage flow and heat transfer in gas turbines
- Optimising plate heat exchanger design and operation
- PIV measurement of the flow field in rectangular ducts with 60 circle parallel, crossed and V-shaped ribs
- Parallelization of a multi-blocked CFD code via three strategies for fluid flow and heat transfer analysis
- Prediction of developing turbulent flow in a rectangular-sectioned curved duct
- Simulation of two-phase flow in a heat exchanger distributor application
- Simulation of two-phase flow in a heat exchanger distributor application
- Stochastic Model for the Investigation of the Influence of Turbulent Mixing on Engine Knock
- Stochastic model for the investigation of the effect of inhomogeneities on engine knock
- Stochastic model for the investigation of the effect of inhomogeneities on engine knock
- Stochastic model for the investigation of the influence of turbulent mixing on engine knock
- Stochastic model for the investigation of the influence of turbulent mixing on engine knock
- Thermal radiative coefficients of cylindrically and spherically shaped soot particles and soot agglomerates
- Three-dimensional analysis of two-phase flow and its effects on the cell performance of PEMFC
- Two-Phase Flow Analysis in a Cathode Duct of PEFCs
- Two-phase flow analysis in a cathode duct of PEFCs
- 2003
- A numerical investigation of gas flow and heat transfer in proton exchange membrane fuel cells
- Advances in Heat Transfer Engineering: proceedings of the Fourth Baltic Heat Transfer Conference, August 25 - 27, 2003
- Advances in recuperator technology for gas turbine systems
- Analysis of turbulent flow and heat transfer in a square-sectioned U-bend
- Analysis of two- and multistream plate heat exchangers in optimization of heat exchanger networks
- Calculation of turbulent fluid flow and heat transfer in ducts by a full Reynolds stress model
- Combined mass suction and buoyancy effects on heat transfer and gas flow in a fuel cell duct
- Detailed thermal and flow fields in a rectangular duct with inclined ribs
- Dynamic modeling of the thermal performance of district heating pipelines
- Dynamic modelling of thermal performance of district heating pipelines
- Experimental investigation of the heat transfer characteristics of confined impinging slot jets
- Gas Flow and Heat Transfer Analysis for an Anode Duct in Reduced Temperature SOFCs
- Heat transfer enhancement in square ducts with V-shaped ribs
- Investigation of a two-equation turbulent heat transfer model applied to ducts
- Knock modeling: an integrated tool for detailed chemistry and engine cycle simulation
- Modeling of two-phase flow in a cathode duct of PEM fuel cells
- Multiblock implementation strategy for a 3-D pressure-based flow and heat transfer solver
- Numerical analysis of knocking cycles by means of a detailed kinetic mechanism
- Numerical and experimental study of the slot film cooling jet with various angles
- Numerical investigation of impingement cooling in ribbed ducts due to jet arrays
- Numerical simulation of fluid flow and heat transfer in corrugated ducts
- Numerical simulation of turbulent fluid flow and heat transfer in corrugated ducts
- Numerical simulation of two-phase flow and heat transfer in a composite duct
- Optimal design of compact heat exchangers by an artificial neural network method
- Optimal design of plate heat exchangers with and without pressure drop specifications
- PIV measurements of the flow field in rectangular ducts with 60 degree parallel, crossed and V-shaped ribs
- Prediction of turbulent heat transfer and fluid flow in 2D channels roughened by square and deformed ribs
- Prediction of turbulent heat transfer and fluid flow in 2D channels roughened by square and round ribs
- Relevance of heat transfer and heat exchangers for development of sustainable energy systems
- Relevance of heat transfer and heat exchangers for greenhouse gas emissions
- Response to Dr. Polley's comments on the paper 'Optimal design of plate heat exchangers with and without pressure drop specification' by L. Wang and B. Sunden
- Simulation of an impinging jet issued into a cross flow with RANS and LES methods
- Simulation of an impinging jet issued into a cross flow with RANS and LES methods
- Simulation of biomass combustion and radiation heat transfer in fixed bed boilers
- Thermal and flow field characteristics in a rectangular duct with broken V-shaped ribs
- Thermal and hydraulic performance of plate heat exchangers as condensers
- Thermal radiation and chemical reactions in combustion of biofuels
- Thermal radiation heat transfer and biomass combustion in a large-scale fixed bed boiler
- Thermo-hydraulic finite element modelling of district heating network by the uncoupled approach
- Three-dimensional computational analysis of gas and heat transport phenomena in ducts relevant for anode-supported solid oxide fuel cells
- 2002
- A numerical investigation of primary surface rounded cross wavy ducts
- Advanced Computational Methods in Heat Transfer VII
- An explicit WET-type model for the turbulent scalar fluxes
- Analysis of Fluid Flow and Heat Transfer for Proton Exchange Membrane Fuel Cells by an Extended Darcy Model
- Analysis of fluid flow and heat transfer in district heating pipelines using the finite element method
- Analysis of some heat exchanger concepts for use as gas turbine intercoolers
- Assessment of some turbulence models for slot jet impinging on flat and concave surfaces
- Computation of combined turbulent convective and impingement heat transfer
- Enhancement of the performance of indirect cooling coils for display cabinets,
- Evaluation of the cross-corrugated and some other candidate heat transfer surfaces for microturbine recuperators
- Gas Flow and Heat Transfer Modeling of an Anode-Supported Solid Oxide Fuel Cell Duct
- Heat Release in the End-Gas Prior to Knock in Lean, Rich and Stoichiometric Mixtures With and Without Egr
- Heat release in the end-gas prior to knock in lean, rich and stochiometric mixtures with and without EGR
- Heat transfer enhancement in square ducts with V-shaped ribs of various angles
- Heat transfer measurements of confined multiple impinging slot jets without cross flow effects
- Impingement cooling in ribbed ducts due to jet arrays
- Improvement of conventional indirect cooling coils for display cabinets – theory and experiments
- Laminar Friction Factors and Colburn Factors for Ducts with Advanced Boundary Conditions
- Methods for assessment of heat transfer coefficient in 180o bend by means of CFD for engineering applications
- Numerical assessment of different turbulence models for slot jet impinging on flat and concave surfaces
- On modelling of thermal radiation properties for biofuels
- On modelling thermal radiation properties for biofuels
- On partially corrugated ducts in heat exchangers
- Optimal design of plate heat exchangers
- Parallelization of a multi-blocked multithreaded general CFD code for heat transfer analysis
- Performance comparison of some tube inserts
- Predictive modelling of heat and mass transfer in hamburger patties
- Simulation of Gas Flow and Heat Transfer in Proton Exchange Membrane Fuel Cells
- The Influence of Nitric Oxide on the Occurrence of Autoignition in the End Gas of Spark Ignition Engines
- The influence of NO on the occurence of autoignition in the end-gas of SI-engines
- 2001
- A numerical investigation of heat transfer enhancement in offset strip fin heat exchangers in self-sustained oscillatory flows
- Buoyancy Effects on Developing Laminar Gas Flow and Heat Transfer in a Rectangular Fuel Cell Duct
- Impingement cooling in a rib-roughened channel with cross-flow
- Simulation of Fully Developed Laminar Heat and Mass Transfer in Fuel Cell Ducts with Different Cross Sections
redaktör
- 2007
- 2006
- 2005
- 2004
- 2003
- 2002
