Jan-Eric Ståhl
Titel
professor, bitr. pref.
Organisation
046-222 85 95
070-564 85 95
Jan-Eric [dot] Stahl [at] iprod [dot] lth [dot] se
Publikationer (hämtat ur Lunds universitets publikationsdatabas)
författare
- 2013
- Conditions for and development of an information technology-support tool for manufacturing cost calculations and analyses
- Influence of the tool surface micro topography on the tribological characteristics in metal cutting - Part II Theoretical calculations of contact conditions
- Influence of the tool surface micro topography on the tribological characteristics in metal cutting – Part I Experimental observations of contact conditions
- Modeling effect of surface roughness on nanoindentation tests
- The Link Between Plasticity Parameters and the Process Parameters in Orthogonal Cutting
- 2012
- A Sustainable Approach for Milling of Duplex Stainless Steel by Increasing the Cutting Tool Utilization
- A cost model for determining an optimal automation level in discrete batch manufacturing
- A cost model for determining an optimal automation level in discrete batch manufacturing
- A method for identification of geometrical tool changes during machining of titanium alloy Ti6Al4V
- A production performance analysis regarding downtime and downtime pattern
- An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
- Analytical Calculation of the Ra Surface Roughness during Turning
- Analytical Calculation of the True Equivalent Chip Thickness for Cutting Tools and its Influence on the Calculated Tool Life
- Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects
- Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
- Cost Based Process Optimization by Incrementally Changing the Cutting Data during Sustainable Machining
- Cost drivers and production limitations for electrified vehicle traction components
- Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
- Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
- Identification of Subsurface Deformation in Machining of Inconel 718
- Improved Tribotesting for Sheet Metal Forming
- Manufacturing costs and Degree of Occupancy Based on the Principle of Characteristic Parts
- Methodology for evaluating effects of material characteristics on machinability-theory and statistics-based modelling applied on Alloy 718
- Modelling Subsurface Deformation in High Speed Machining of Inconel 718
- NEXT STEP in Cost-based Sustainable Production Development - Cases from different Production Operations
- Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718
- Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
- The affect of Johnson Cook plasticity parameters on the cutting process parameters
- The scale of permanent magnet materials for automotive traction motors
- 2011
- A fully coupled thermo-mechanical simulation model for orthogonal cutting-formulation and validation
- A fully coupled thermomechanical two-dimensional simulation model for orthogonal cutting: formulation and simulation
- A new concept of coil design for industrial induction heating
- A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting
- Analytical and Experimental Determination of the Ra Surface Roughness during Turning
- Characterization of White Layer Generated when Turning Aged Inconel 718
- Cost Optimization by Incremental Production Improvements of Metal Cutting Operations
- Development of a Novel Superfinishing Apparatus for Controlled Texturing of Functional Surfaces
- Dynamic Manufacturing Costs - Describing the Dynamic Behavior of Downtimes from a Cost Perspective
- Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
- Evaluating the Machinability of Inconel 718 Using Polar Diagrams
- Experimental Study of the Minimum Chip Thickness during the Machining of Duplex Stainless Steel
- Experimental studies of cutting force variation in face milling
- Improved tool wear properties in sheet metal forming using Carbide steel, a novel abrasion resistant cast material
- Indentification of Subsurface Deformation in Machining of Inconel 718
- Industrial heating using energy efficient induction technology
- Machinability of duplex stainless steels - A study with focus on the tool wear behaviour
- Methodology for evaluating effects of material characteristics on machinability—theory and statistics-based modelling applied on Alloy 718
- Modeling of maintenance costs
- Modelling tool life in the machining of strain-hardening material - Alloy 718
- On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation
- On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line
- On the surface quality of Alloy 718 in finishing turning with CBN cutting tools
- Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions
- Relations between Volume Flexibility and Part Cost in Assembly Lines
- Study on work-hardening phenomena in machining aged Alloy 718
- The development of NEXT STEP beyond Lean Production - The link between technology and economics with focus on sustainable developments
- 2010
- 2009
- 2008
- A general economic model for manufacturing cost simulation
- An analythical geometry study of gear hobbing
- Experimental studies of cutting force variation in face milling
- Greencut - an attempt to introduce an environmentally sustainable system for complex cutting tools
- Implementation of an economic model to simulate manufacturing costs
- Modeling the cooling effect in compressed air assisted machining
- Modelling ot metal cutting tool wear based on Archards wear equation
- Software realization of the TESSPA method-criteria description and software performance analysis
- Tribological analysis in comparison of dry and air assisted maching
- Tribological analysis of the machinability of compacted graphite iron
- 2007
- A basic economic model for judging production development
- Analytic modelling of contact stresses around the honed edge in metal cutting - based on cutting force measurements
- Coldings tool life model applied on tool wear when machining the Maxthal material
- Flex-rail: a semi industrial test tool for various applications such as: Springback analysis
- Hard milling of abrasion resistance cast iron with pcbn cutting tool
- Manufacturing economic simulation of a flexible manufacturing cell
- Modelling of the composite temperature 8c in metal cutting tools
- Polar machinability diagrams - a model to predict the machinability of a work material
- True equivalent chip thickness for tools with a nose radius
- 2004
- 2003
- 2002
- 2000
- 1998
- Adaptiv reglering av verktygvibrationer vid svarvning
- Monitoring of friction processes by the means of acoustic emission measurements—deep drawing of sheet metal
- Recycled carbon fibre composite as reinforcing elements in thermoplastic composites
- Samverkan mellan Mekaniska och Termiska Belastningar Verkande på Skärverktyg
- Study of Mechanical Load at Entry and Exit Phase of the Intermittent Cut
- 1997
- Analysis of Mechanical Load in the Cutting Tool at Entry and Exit Phase of the Intermittent Cut
- Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification Part I: Stress Model
- Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification, Part II: Experimental Studies
- Granuleringsmekanik för sammansatta polymerbaserade material
- Miljö och kretsloppsanpassning av produktionsmetoder för högpresterande kolfiberkompositer
- 1995
- A system for monitoring cutting tool spontaneous failure based on the cutting edge stress estimation
- Cutting force model for multi-toothed cutting processes and force measurement equipment for face milling
- Identification of mechanical load in cutting tool using an artificial neural network
- Machining of ring shaped worn pieces
- Thermo-Elastic and Traction Load Stress Analysis of the Cutting Tool In Continues Cutting Conditions
- 1994
- 1992
- Bildning, transport och eliminering av damm vid bearbetning av fibrer, förformar och kompositer
- Giant magnetostrictive composite material for ultrasonic applications
- New Developments In One Stroke Actuators Based on High Magnetistrictive Materials
- Static and Dynamic Friction Processes Under the Influence of external Vibrations
- 1991
- 1989
- 1988
- 1986
