Solveig Melin
Titel
Professor
Organisation
046-222 30 37
Solveig [dot] Melin [at] mek [dot] lth [dot] se
Publikationer (hämtat ur Lunds universitets publikationsdatabas)
författare
- 2012
- Characteristics of short fatigue crack growth in the vicinity of a low angle grain boundary
- Characteristics of short fatigue crack growth in the vicinity of a low angle grain boundary
- Hur vänder man en kurs? Betraktelser över grundkursen i mekanik för industriell ekonomi våren 2012- kvalitativa och kvantitativa observationer från CEQ-utvärderingen
- Study on nanocrystalline Cr2O3 films deposited by arc ion plating: I. composition, morphology, and microstructure analysis
- Study on nanocrystalline Cr2O3 films deposited by arc ion plating: II. Mechanical and tribological properties
- 2011
- 2010
- ESEM study of overload effects during fatigue crack growth using an image analyzing technique
- Grain boundary influence on short fatigue crack growth rate
- Influence from geometrical features on the growth rate of a micro-structurally short fatigue crack
- Influence from geometrical features on the growth rate of a microstructurally short fatigue crack
- SEM study of overload effects during fatigue crack growth using an image analyzing technique and potential drop measures
- 2009
- Atomistic studies of the elastic properties of metallic Bcc nanowires and films
- Crack growth rates for microstructurally short fatigue cracks
- Growth of a short fatigue crack - A long term simulation using a dislocation technique
- Thermo-mechanical fatigue crack propagation experiments in Inconel 718
- Thermo-mechanical fatigue crack propagation in Inconel 718
- 2008
- Atomistic simulations of tensile and bending properties of single-crystal bcc iron nanobeams
- Computationally efficient modelling of short fatigue crack growth using dislocation formulations
- Determination of displacements around fatigue cracks using image analysis of in-situ scanning electron microscope images
- Fatigue crack growth in the vicinity of a grain boundary using a discrete dislocation technique
- Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
- In situ scanning electron microscopy study of fatigue crack propagation
- In-situ ESEM study of thermal-mechanical fatigue crack propagation
- In-situ ESEM study of thermo-mechanical fatigue crack propagation
- Influence of low-angle boundaries on short fatigue cracks studied by a discrete dislocation method
- Simulation of simplified zigzag crack paths emerging during fatigue crack growth
- Thermo-mechanical fatigue crack propagation experiments in Inconel 718
- 2007
- Atomistic simulations of elastic properties of metallic nanowires
- Atomistic simulations of tensile and bending properties of single-crystal BCC-Iron nanobeams
- Atomistiska böjsimuleringar av nanobalkar bestående av BCC-järn
- Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
- In situ scanning electron microscopy study of fatigue crack propagation
- Overload effects on short fatigue crack growth
- 2006
- An experimental method to determine compliance curves close to the crack tip and comparison with PD-signal for fatigue cracks exposed to overloads
- Comparison between fatigue crack growth modelled by continuous dislocation distributions and discrete dislocations
- Dislocation modelling of short fatigue cracks
- Experimental and numerical investigation of crack closure measurements with electrical potential drop technique
- High-temperature fatigue crack growth in Inconel 718 subjected to high strain amplitudes
- Image analysis of scanning electron microscope images to determine crack opening stress, crack shape and strain field of fatigue cracks exposed to overloads
- Influence of fatigue load range on the growth of a microstructurally short edge crack simulated by a discrete dislocation formulation
- Simulation of fatigue crack paths using a continuous dislocation distribution formulation
- 2005
- Dislocation-based modelling of the growth of a micro structurally short crack by single shear due to fatigue loading
- Fatigue crack propagation in Ti-6Al-4V subjected to high strain amplitudes
- Fatigue crack propagation in Ti-6Al-4V subjected to high strain amplitudes
- In-situ scanning electron microscope study of thermo-mechanical fatigue crack behaviour
- Load range influence of a short propagating edge crack using the discrete dislocation technique
- Long crack behavior in a thermal barrier coating upon thermal shock loading
- Numerical investigation of Powder Metallurgy manufactured gear wheels subjected to fatigue loading
- 2004
- A study of the influence of grain boundaries on short crack growth during varying load using a dislocation technique
- An in situ sem study of crack propagation
- Constitutive dependence in finite-element modelling of crack closure during fatigue
- Experimental methods for thermomechanical fatigue in gas turbine materials
- Fracture mechanics analysis of microcracks in thermally cycled thermal barrier coatings
- Influence of varying load spectra on short crack growth modelled by a dislocation technique
- Modelling of stage I fatigue crack growth through alternating slip
- Numerical Modeling of short crack behavior in a thermal barrier coating upon thermal shock loading
- Numerical modelling of P/M steel bars subjected to fatigue loading using an extended Gurson model
- 2003
- A tool to model short crack fatigue growth using a discrete dislocation formulation
- An evaluation of the electrical potential drop technique for crack closure measurements
- Dislocation modelling of mechanisms involved in fatigue crack initiation
- Fracture Mechanics Analysis of Micro-cracks in Thermally Cycled Thermal Barrier Coatings
- Numerical investigation of powder compaction of gear wheels
- The influence of grain orientation on fatigue growth of a short crack in the vicinity of a grain boundary
- 2002
- A SEM and FE fatigue crack growth study of Al 2014 and IN 718
- Fracture mechanics considerations on pre-cracked TBC systems
- Numerical examination of potential drop technique for crack closure measurements
- Propagation of a short fatigue crack modeled by a boundary element approach
- The influence of the T-stress on the directional stability of cracks
- 2001
- 1995
- 1994
- 1993
- 1992
- 1991
- 1989
- 1987
- 1986
redaktör
- 2013
