Du är här

Use of VSC-HVDC for industrial systems having onsite generation with frequency control

Författare:
Publiceringsår: 2008
Språk: Engelska
Sidor: 2233-2240
Publikation/Tidskrift/Serie: IEEE TRANSACTIONS ON POWER DELIVERY
Volym: 23
Nummer: 4
Dokumenttyp: Artikel
Förlag: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC

Sammanfattning

This paper presents a voltage-source-converter (VSC)-FfVDC-supplied industrial system with onsite generation where the VSC-HVDC and generator are taking part in the voltage and frequency control. The reason for using a frequency controller in the converter is to increase the ridethrough capability of the VSC-HVDC-supplied industrial system by exploiting the inertia energy of rotating masses in case of voltage disturbances. The investigation is performed using the PSCAD/EMTDC program and the dynamic performance of the system is evaluated during grid faults and load changes. Three comparisons are done to analyze the system response when the inverter uses different frequency-control strategies, the impact on the system when the turbine operates in different modes, and the VSC-HVDC's ability to mitigate voltage dips from the grid. Simulation results show that the use of a VSC-HVDC for feeding industrial plants can mitigate voltage dips in the grid. Different frequency-control strategies have different responses on the system. The best frequency response is achieved when the turbine is also equipped with a frequency controller.

Disputation

Nyckelord

  • Technology and Engineering
  • voltage-source converter (VSC)-HVDC
  • voltage dips
  • onsite generation
  • current limit
  • frequency controllers

Övriga

Published
Yes
  • ISSN: 0885-8977

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

 

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen