Meny

Javascript is not activated in your browser. This website needs javascript activated to work properly.
Du är här

Respirometric analysis of activated sludge models from palm oil mill effluent

Författare:
Publiceringsår: 2010
Språk: Engelska
Sidor: 144-149
Publikation/Tidskrift/Serie: Bioresource Technology
Volym: 101
Nummer: 1
Dokumenttyp: Artikel
Förlag: Elsevier Sci Ltd

Sammanfattning

Activated sludge models (ASMs) have been widely used as a basis for further model development in wastewater treatment processes. Values for parameters to be used are vital for the accuracy of the modeling approach. A continuous stirred tank reactor (CSTR), as open respirometer with continuous flow for 20 h is used in ASMs. The dissolved oxygen (DO) profile for 11 days was monitored. It was found the mass transfer coefficient K-La is 0.3 h(-1) during lag and start feed phase and 0.01 h(-1) during stop feed phase, while the heterotrophic yield coefficient Y-H is 0.44. Some of the chemical oxygen demand (COD) fractionations of palm oil mill effluent (POME) using respirometric test in ASM models are S-s 50 mg/L, S-1 16,600 mg/L, X-S 25,550 mg/L, and X-1 2,800 mg/L The comparison of experimental and ASM I from OUR concentration is found to fit well. (C) 2009 Elsevier Ltd. All rights reserved.

Disputation

Nyckelord

  • Technology and Engineering
  • Respirometry test
  • Palm oil mill effluent
  • Activated sludge models
  • COD fractionations

Övriga

Published
Yes
  • ISSN: 0960-8524

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen