Polysulfone ionomers for proton-conducting fuel cell membranes: sulfoalkylated polysulfones
Författare
Summary, in English
Polysulfones (PSUs) carrying short pendant alkyl side-chains with terminal sulfonic acid units have been prepared and studied as proton-conducting membrane materials. The first step in the preparation involved quenching of lithiated PSU with SO2 gas, resulting in sulfinated PSU. In the second step, the lithium sulfinate units on the polymer were reacted with sodium 2-bromoethanesulfonate, sodium 3-bromopropanesulfonate, or 1,4-butane sultone to produce sulfoethylated, sulfopropylated, or sulfobutylated PSUs, respectively. Analysis by thermogravimetry showed that membranes based on the sulfoalkylated polymers were stable up to approximately 300degreesC under N-2 atmosphere. Calorimetry measurements revealed that the modified polymers absorbed large amounts of non-freezing water, corresponding to 11-14 mol H2O/mol SO3H under immersed conditions. The proton conductivity of a membrane based on a PSU carrying 0.9 sulfopropyl chains per repeating unit was measured to be 77 mS/cm at 70degreesC under humidifying conditions. (C) 2003 Elsevier B.V. All rights reserved.
Publiceringsår
2004
Språk
Engelska
Sidor
61-70
Publikation/Tidskrift/Serie
Journal of Membrane Science
Volym
230
Issue
1-2
Dokumenttyp
Artikel i tidskrift
Förlag
Elsevier
Ämne
- Chemical Sciences
Nyckelord
- Ion exchange membrane
- Polysulfone
- Water absorption
- Sulfonation
- Proton conducting electrolyte
Status
Published
ISBN/ISSN/Övrigt
- ISSN: 0376-7388