Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Improving waviness of bore in precision hard turning by pressurized coolant

In English

Författare

Summary, in English

Precision hard turning is an emerging innovated machining technology for machining hardened workpiece (60 similar to 62 HRC) with characteristic of better flexibility, high production rate, and cost saving. However, one of problem in this process is that it is difficult to remove the thermal distortion of the workpiece induced by the heat generated during the process, especially in the case of precision hard turning of bore. In this paper, pressurized coolant was used in a precision hard turning of bore, with polycrystalline cubic boron nitride as the tool materials, to reduce the thermal distortion of the machined part such as form error and to improve its waviness. The pressurized coolant jet was directly delivered under the chip on the rake face. Experimental result indicated that form error induced by the heat has been reduced, and waviness of the bore was improved with use of pressurized coolant. Crater wear is smaller under pressurized coolant compared to dry cut due to lower rake face temperature and shorter contact length between chip and workpiece.

Publiceringsår

2010

Språk

Engelska

Sidor

469-474

Publikation/Tidskrift/Serie

International Journal of Advanced Manufacturing Technology

Volym

49

Issue

5-8

Dokumenttyp

Artikel i tidskrift

Förlag

Springer

Ämne

  • Materials Engineering

Nyckelord

  • PCBN
  • Coolant
  • Waviness
  • Hard turning

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 0268-3768