Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

The Effect of Transfer Port Geometry on Scavenge Flow Velocities At High Engine Speed

In English

Författare

  • Martin Ekenberg
  • Bengt Johansson

Summary, in English

2-D LDV measurements were performed on two different cylinder designs in a fired two-stroke engine running with wide-open throttle at 9000 rpm. The cylinders examined were one with open transfer channels and one with cup handle transfer channels.



Optical access to the cylinder was achieved by removing the silencer and thereby gain optical access through the exhaust port. No addition of seeding was made, since the fuel droplets were not entirely vaporized as they entered the cylinder and thus served as seeding.



Results show that the loop-scavenging effect was poor with open transfer channels, but clearly detectable with cup handle channels. The RMS-value, "turbulence", was low close to the transfer ports in both cylinders, but increased rapidly in the middle of the cylinder. The seeding density was used to obtain information about the fuel concentration in the cylinder during scavenging.

Publiceringsår

1996

Språk

Engelska

Publikation/Tidskrift/Serie

SAE Special Publications

Issue

SP-1131

Dokumenttyp

Konferensbidrag

Förlag

Society of Automotive Engineers

Ämne

  • Other Mechanical Engineering

Nyckelord

  • Transfer Port Geometry
  • Two-Stroke
  • Combustion
  • Engine
  • Flow Velocity

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 0148-7191