Meny

Du är här

Composite Cryogels: Stationary Phase for Separation of Complex Media

Författare:
  • Solmaz Hajizadeh
Publiceringsår: 2012
Språk: Engelska
Sidor: 138
Dokumenttyp: Doktorsavhandling
Förlag: Department of Biotechnology, Lund University

Sammanfattning

Demands for efficient, economical and fast separation and purification methods for various target molecules have led to the
development of new techniques and materials for bioseparation processes. Separation can be carried out in both batch and
chromatographic modes. Running the separation step in a conventional chromatographic column is more efficient than batch mode,
but there are some limitations with this technique for direct capture of targets from complex media or applying it for purification of
products larger than 10 nanometres. Therefore there is a need for new materials that can be used for purification of a target directly
from particulate-containing fluids in a short time. On the other hand, packing different adsorbent particles in a column or handling
them free in suspension might be difficult and challenging due to the high backpressure and risk of leakage, while immobilization of
the particle adsorbents on a matrix can reduce these problems.
Cryogels, supermacroporous hydrogels, as a class of monolithic stationary phase are a product of cryogelation technology and have
interconnected channels in the micrometre range. Due to the porous structure, free passage of particles is possible and efficient mass
transfer and good flow through properties are expected. These polymeric networks can be used as a robust matrix for embedding
different types of particles and adsorbents in order to form composite cryogels. Immobilization of particles inside cryogels leads to the
creation of greater surface area inside the matrix; thus, greater binding capacity of the gels is achieved. The combination of the porous
structure of the matrix and selective adsorption by the adsorbents embedded in the gel form a unique composition that is suitable for
separating a wide range of small/large target molecules. Composite cryogels can be prepared by one-step polymerization either from
monomer/polymer solutions or particle suspensions under cryotropic conditions. Applying a particle suspension has advantages over a
monomer solution when embedding porous adsorbents inside the network, since a polymerization solution can penetrate into the pores
and affect the capacity of the adsorbent during the process, while particles are larger than the size of the pores and cannot block them.
Here in this work, composite cryogels were evaluated for water/wastewater treatment and also as an affinity matrix for glycoprotein
purification. Activated carbon, molecularly imprinted polymer (MIP) and ion-exchange adsorbents were synthesized to form composite
cryogels for environmental applications in this study. Capturing phenol, as a small organic compound, was evaluated with a carboncomposite
cryogel formed from a particle suspension due to the highly porous structure of the carbon. A molecularly imprinted
polymer technique was also used for fabrication of adsorbents based on inorganic and organic templates for selective removal of
bromate and propranolol from aqueous/complex media, respectively. The selectivity of these adsorbents towards the target molecules
was high even in the presence of analogue molecules. The selectivity of MIP adsorbents was evaluated with ion-exchange adsorbent for
studying the removal of bromate.
The possibility of forming different types of chromatography columns, such as affinity columns, by introducing proper (bio)ligands
or functional groups on the cryogels is another feature which makes this material adaptable for different applications. By synthesizing
composite cryogels as a form of affinity matrix, the binding capacity of the network will increase due to the higher surface area. This
was studied in this work by preparing composite polyvinylalcohol cryogels and immobilizing concanavalin A via epoxy groups.
Horseradish peroxidase was selected as a target and its binding/elution was studied in both batch and chromatographic systems. The
adsorption isotherm and kinetics of the developed materials were also evaluated in this work. Improving composite cryogel materials
with porous/non-porous adsorbents for direct capture of small/large targets from complex media can be valuable for synthesizing more
efficient chromatographic supports with high capacity both for academic and industrial applications.

Disputation

2012-12-06
10:30
Lecture hall B at the Center of Chemistry and Chemical Engineering. Getingevägen 60, Lund
  • Aleš Podgornik

Nyckelord

  • Chemistry
  • Earth and Environmental Sciences
  • Biology and Life Sciences
  • Technology and Engineering
  • Composite cryogel
  • Complex media
  • Purification
  • Chromatography
  • Environmental application
  • Molecularly imprinted polymer

Övriga

  • Bo Mattiasson
  • ISBN: 978-91-89627-89-5

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen