Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Investigation of formaldehyde enhancement by ozone addition in CH4/air premixed flames

In English

Författare

Summary, in English

Abstract The ozone (O3) decomposition in the pre-heat zone of flames can initiate and accelerate the chain-branching reactions. In the present study, formaldehyde (CH2O) was investigated by both experiment and simulation methods in methane/air laminar premixed flames under atmospheric conditions. The formaldehyde concentration profiles in the flames were measured with CH2O-PLIF. When 4500 ppm of ozone was added, the formaldehyde concentration in Bunsen type laminar flame was enhanced by 58.5% at fuel-rich condition (Ï = 1.4) and 15.5% at stoichiometric condition. In the simulation work, the most recent ozone sub-mechanism was coupled with GRI-mech 3.0 kinetic mechanism. It showed that with 4500 ppm ozone addition, the formaldehyde concentration was enhanced by about 48.1% at rich condition (Ï = 1.4) and about 14.7% in stoichiometric mixture. The simulation suggested an early production of CH2O with ozone addition, especially in rich conditions. These reactions occurred at relatively low temperature, around 500 K. In order to isolate these reactions from the flame, experiments with preheated unburned mixtures were carried out. A larger amount of formaldehyde was produced in the zone far from the flame as the preheating temperature was increased. It indicated that the combustion enhancement with ozone could be caused by the additional reactions of ozone at relatively low temperature. Simulations showed that methoxy radical (CH3O) is the key specie for production of formaldehyde at lower temperatures. Early in the pre-heat zone of the laminar flame, formaldehyde occurs via decomposition of CH3O while in the pre-heated gas mixture via reaction of CH3O with O2. Furthermore, the O3 effect on turbulent flames was investigated showing a greater enhancement in formaldehyde signal than that in the laminar cases. This difference in formaldehyde signal enhancement could be attributed to the expansion of the preheat zone, due to turbulence.

Avdelning/ar

Publiceringsår

2015

Språk

Engelska

Sidor

1284-1293

Publikation/Tidskrift/Serie

Combustion and Flame

Volym

162

Issue

4

Dokumenttyp

Artikel i tidskrift

Förlag

Elsevier

Ämne

  • Atom and Molecular Physics and Optics

Nyckelord

  • Ozone
  • Formaldehyde
  • Methane flame
  • Pre-heating
  • CH2O-PLIF

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 0010-2180