Du är här

Force and Acceleration Sensor Fusion for Compliant Robot Motion Control

Författare:
Publiceringsår: 2005
Språk: Engelska
Sidor: 2709-2714
Publikation/Tidskrift/Serie: Robotics and Automation, 2005. ICRA 2005. Proceedings of the 2005 IEEE International Conference on
Dokumenttyp: Konferensbidrag
Förlag: IEEE Press

Sammanfattning

In this work, we present implementation and experiment of the theory of dynamic force sensing for robotic manipulators, which uses a sensor fusion technique in order to extract the contact force exerted by the end-effector of the manipulator from those measured by a wrist force sensor, which are corrupted by the inertial forces on the end-effector. We propose a new control strategy based on multisensor fusion with three different sensors that is, encoders mounted at each joint of the robot with six degrees of freedom, a wrist force sensor and an accelerometer whose goal is to obtain a suitable contact force estimator for the three Cartesian axes. This new observer contributes to overcome many of the difficulties of uncertain world models and unknown environments, which limit the domain of application of currents robots used without external sensory fedback. An impedance control scheme was proposed to verify the improvement. The experiments were carried out on an ABB industrial robot with open control system architecture.

Disputation

Nyckelord

  • Technology and Engineering
  • Force Control
  • Robot Control
  • Sensor Fusion
  • Observers

Övrigt

IEEE International Conference on Robotics and Automation (ICRA)
2014-04-19
Barcelona, Spain
Published
Yes
  • ISBN: 0-7803-8914-X

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen

LERU logo U21 logo