Du är här

Aspects on ADM1 Implementation within the BSM2 Framework

Publiceringsår: 2005
Språk: Engelska
Publikation/Tidskrift/Serie: TEIE
Dokumenttyp: Rapport
Förlag: Dept. of Industrial Electrical Engineering and Automation, Lund Institute of Technology

Sammanfattning

The current work of developing a control simulation benchmark goes back to the work carried out within the COST
Action 682 (“Integrated Wastewater Management”) and the IAWQ Task Group on Respirometry-Based control of the
Activated Sludge Process in the late 90s. The work was continued in COST Action 624 until 2003 (Copp 2002). In
2005, the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants (BSM TG) was
initiated and is now responsible for the continued development of the benchmark work.
This report describes the development of the Lund implementation of the Anaerobic Digester Model No 1 (ADM1).
The aim of the report is to give an insight and rationale for the various changes and extensions made to the original
model as reported in Batstone et al. (2002). Since the ADM1 was developed for general modelling of anaerobic
digestion, opposed to for instance the ASM models, which were specifically developed for wastewater treatment,
Batstone et al. (2002) leave some choices to the model implementor and this report will discuss how these choices
were made in order to make this specific implementation as suitable for wastewater treatment sludge digestion as
possible. The implementation was initiated by the inclusion of the sludge treatment in the IWA benchmark simulation
model (BSM) to form a plant-wide or "within-the-fence" model.

Disputation

Nyckelord

  • Technology and Engineering

Övriga

Published
7224
  • CODEN: LUTEDX/(TEIE-7224)/1-35/(2006)

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

LERU logotype U21 logotype

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen