Sealants between elements of aerated concrete
Författare
Summary, in English
Because of the low tensile strength of aerated concrete, the sealing of joints between such elements causes special problems.
In this paper some main characteristics of sealants for use in aerated concrete joints are discussed. These properties are elongation resistance, elasticity, and ageing. The elongation resistance was examined at different rates and different temperatures. The elasticity was determined by measuring the residual deformation after a certain elongation. Storing in heat (40°C or 70°C) was used for accelerating ageing.
Of ten sealants, only four were found to be suitable in aerated concrete joints. Many of the disqualified sealants showed defective ageing properties or high resistance to elongation, which in some cases caused cohesive failure within the aerated concrete.
In this paper some main characteristics of sealants for use in aerated concrete joints are discussed. These properties are elongation resistance, elasticity, and ageing. The elongation resistance was examined at different rates and different temperatures. The elasticity was determined by measuring the residual deformation after a certain elongation. Storing in heat (40°C or 70°C) was used for accelerating ageing.
Of ten sealants, only four were found to be suitable in aerated concrete joints. Many of the disqualified sealants showed defective ageing properties or high resistance to elongation, which in some cases caused cohesive failure within the aerated concrete.
Avdelning/ar
Publiceringsår
1980
Språk
Engelska
Sidor
43-47
Publikation/Tidskrift/Serie
International Journal of Cement Composites and Lightweight Concrete
Volym
2
Issue
1
Dokumenttyp
Artikel i tidskrift
Förlag
Elsevier
Ämne
- Materials Engineering
Nyckelord
- Aerated concrete
- sealants
- mastic
- ageing
- deformation characteristics
- heat
Status
Published
ISBN/ISSN/Övrigt
- ISSN: 0262-5075