Low power radio transmitter
Författare
Summary, in English
A transmitter consisting of a voltage
controlled oscillator (VCO) and power amplifier
(PA) for the 400 MHz Medical Implanted Communication
System band (MICS) was built in a standard
0.35-μm CMOS process. A push pull architecture
was used for both the VCO and the PA. Two
off-chip inductors were needed.
The design was optimized for 400 μW output
power at 3 V supply, which resulted in an efficiency
of 26 %. This gives a total power consumption of
1.6 mW, of which the VCO uses about 0.3 mW.
controlled oscillator (VCO) and power amplifier
(PA) for the 400 MHz Medical Implanted Communication
System band (MICS) was built in a standard
0.35-μm CMOS process. A push pull architecture
was used for both the VCO and the PA. Two
off-chip inductors were needed.
The design was optimized for 400 μW output
power at 3 V supply, which resulted in an efficiency
of 26 %. This gives a total power consumption of
1.6 mW, of which the VCO uses about 0.3 mW.
Publiceringsår
2003
Språk
Engelska
Publikation/Tidskrift/Serie
GigaHertz 2003. Proceedings from the Seventh Symposium, November 4-5, 2003, Linköping, Sweden
Dokumenttyp
Konferensbidrag
Ämne
- Electrical Engineering, Electronic Engineering, Information Engineering
Conference name
GigaHertz 2003, the Seventh Symposium
Conference date
2003-11-04 - 2003-11-05
Status
Published
Forskningsgrupp
- Elektronikkonstruktion
ISBN/ISSN/Övrigt
- ISSN: 1650-3686
- ISSN: 1650-3740