Meny

Du är här

Accuracy of kinematic and dynamic models of a Gantry-Tau parallel kinematic robot

Författare:
Publiceringsår: 2007
Språk: Engelska
Sidor: 883-888
Publikation/Tidskrift/Serie: 2007 IEEE International Conference on Robotics and Automation (IEEE Cat No. 07CH37836D)
Dokumenttyp: Konferensbidrag
Förlag: IEEE

Sammanfattning

In this article, a new kinematic and a dynamic model for a 3-degree-of-freedom Gantry-Tau parallel kinematic robot are presented. Similar to an earlier proposed kinematic model, the dynamic model is based on the assumption of parallel actuator axes and constant end-effector orientation. The new kinematic model takes into account rotations of actuator axes which do not affect the end-effector orientation. Results from a calibration experiment show an improved positioning accuracy of the new kinematic model. A more general model of the robot including possible geometric inaccuracies causing deviations from the model assumptions has been developed in the modeling language Modelica. In a simulation, the proposed dynamic model is tested as a feedforward term in a control application and is found to improve the tracking performance considerably.

Disputation

Nyckelord

  • Technology and Engineering
  • kinematic model
  • dynamic model
  • Gantry-Tau parallel kinematic robot
  • Modelica

Övriga

2007 IEEE International Conference on Robotics and Automation
10-14 April 2007
Roma, Italy
Published
Yes
  • ISSN: 1050-4729

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen