Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Waste heat recovery in a cruise vessel in the Baltic Sea by using an organic Rankine cycle: a case study

In English

Författare

Summary, in English

Maritime transportation is a significant contributor to SOx, NOx and particle matter emissions, and to a lesser extent, of CO2. Recently new regulations are being enforced in special geographical areas to limit the amount of emissions from the ships. This fact, together with the high fuel prices, is driving the marine industry towards the improvement of the energy efficiency of ships. Although more sophisticated and complex engine designs can improve significantly of the energy systems on ships, waste heat recovery arises as the most effective technique for the reduction of the energy consumption. In this sense, it is estimated that around 50% of the total energy from the fuel consumed in a ship is wasted and rejected through liquid and gas streams. The primary heat sources for waste heat recovery are the engine exhaust and coolant. In this work we present a study on the integration of an organic Rankine cycle (ORC) in an existing ship, for the recovery of the main and auxiliary engines exhaust heat. Experimental data from the engines on the cruise ship M/S Birka Stockholm were logged during a port-to-port cruise from Stockholm to Mariehamn, over a period of four weeks. The ship has four main engines Wärtsilä 5850 kW for propulsion, and four auxiliary engines 2760 kW which are used for electrical generation. Six engine load conditions were identified depending on the ship’s speed. The speed range from 12-14 knots was considered as the design condition for the ORC, as it was present during more than 34% of the time. In this study, the average values of the engines exhaust temperatures and mass flow rates for each load case, were used as inputs for a model of an ORC. The main parameters of the ORC, including working fluid and turbine configuration, were optimized based on the criteria of maximum net power output and compactness of the installation components. Results from the study showed that an ORC with internal regeneration using benzene as working fluid would yield the greatest average net power output over the operating time. For this situation, the power production of the ORC would represent about 22% of the total electricity consumption on board. These data confirmed the ORC as a feasible and promising technology for the reduction of fuel consumption and CO2 emissions of existing ships.

Avdelning/ar

Publiceringsår

2016

Språk

Engelska

Publikation/Tidskrift/Serie

Journal of Engineering for Gas Turbines and Power

Volym

138

Issue

1

Dokumenttyp

Artikel i tidskrift

Förlag

American Society Of Mechanical Engineers (ASME)

Ämne

  • Energy Engineering

Nyckelord

  • Baltic Sea
  • ship
  • waste heat recovery
  • organic Rankine cycle

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 1528-8919