Ion Current Sensing for HCCI Combustion Feedback
Författare
Summary, in English
Measurement of ion current signal from HCCI combustionwas performed. The aim of the work was to investigateif a measurable ion current signal exists and if it is possible to obtain useful information about the combustion process. Furthermore, influence of mixture quality in termsof air/fuel ratio and EGR on the ion current signal wasstudied. A conventional spark plug was used as ionizationsensor. A DC voltage (85 Volt) was applied acrossthe electrode gap. By measuring the current through thegap the state of the gas can be probed. A comparisonbetween measured pressure and ion current signal wasperformed, and dynamic models were estimated by usingsystem identification methods.The study shows that an ion current signal can be obtainedfrom HCCI combustion and that the signal levelis very sensitive to the fuel/air equivalence ratio. Themost important result from this study is that the ion current signal proved to be an excellent indicator of the actual combustion timing which is crucial piece of information for HCCI control.
Publiceringsår
2003
Språk
Engelska
Publikation/Tidskrift/Serie
SAE Technical Papers
Issue
2003-01-3216
Länkar
Dokumenttyp
Konferensbidrag
Förlag
Society of Automotive Engineers
Ämne
- Control Engineering
- Other Mechanical Engineering
Status
Published
Projekt
- HCCI Control
- Competence Centre for Combustion Processes
ISBN/ISSN/Övrigt
- ISSN: 0148-7191