Assessment of QT-measurement accuracy using the 12-lead electrocardiogram derived from EASI leads
Författare
Summary, in English
The purpose of the present study is to assess QT-interval measurements from the EASI 12-lead electrocardiogram (ECG) as compared with the standard 12-lead ECG. The QT interval was automatically determined in simultaneously recorded standard and EASI 12-lead ECGs, using a validated wavelet-based delineator. The agreement between the 2 sets of measurements was quantified both on a lead-by-lead basis and a multilead basis with global definitions of QRS onset and T-wave end. The results show that the agreement between QT-interval measurements from the 2 lead systems is acceptable, with negligible mean differences and with correlation coefficients ranging from 0.91 to 0.98 depending on the lead studied. Although the SD shows a clear dependence on the selected lead (ranging from 9.2 to 26.4 milliseconds), differences are within the accepted tolerances for automatic delineation. In a few patients, large differences were found, mainly because of changes in morphology present in both lead systems. QT intervals measured by the multilead approach were considerably more stable than single-lead measurements and resulted in a much better agreement between the 2 lead systems (correlation coefficient, 0.98; QT difference, 1.1 +/- 9.8 milliseconds). Thus, the EASI 12-lead ECG may be used for reliable QT monitoring when the multilead delineation approach is adopted. (c) 2007 Elsevier Inc. All rights reserved.
Publiceringsår
2007
Språk
Engelska
Sidor
172-179
Publikation/Tidskrift/Serie
Journal of Electrocardiology
Volym
40
Issue
2
Länkar
Dokumenttyp
Artikel i tidskrift
Förlag
Elsevier
Ämne
- Cardiac and Cardiovascular Systems
Status
Published
ISBN/ISSN/Övrigt
- ISSN: 1532-8430