Heat Transfer Enhancement of a Gas Turbine Blade-Tip Wall
Författare
Redaktör
- Bengt Sundén
- Qiuwang Wang
- Yitung Chen
Summary, in English
The blade-tip region encounters high thermal loads because of the hot gas leakage flows. A common way to cool blade tips is to design serpentine passages with 180 degrees turn with the blade-tip walls inside the turbine blades. Improved internal convective cooling is therefore required to increase blade-tip lifetime. This chapter summarizes the heat transfer enhancement of an internal blade-tip wall having pins, dimples and protrusions, and the influence of guide ribs and pins material. It is found that the pinned tip exhibits best performance to improve the blade-tip cooling. However, when considering the added mechanical stress, making dimples is a more suitable way especially at low Reynolds numbers. Properly designed guide ribs might reduce the pressure loss.
Avdelning/ar
Publiceringsår
2014
Språk
Engelska
Sidor
67-88
Publikation/Tidskrift/Serie
Emerging Topics in Heat Transfer: Enhancement and Heat Exchangers
Dokumenttyp
Del av eller Kapitel i bok
Förlag
WIT Press
Ämne
- Energy Engineering
Nyckelord
- Blade-tip wall
- heat transfer enhancement
- numerical simulation
Status
Published
ISBN/ISSN/Övrigt
- ISBN: 978-1-84564-819-0