Selection of adsorbents for treatment of leachate: batch studies of simultaneous adsorption of heavy metals
Författare
Summary, in English
The simultaneous adsorption of copper (Cu), cadmium (Cd), nickel (Ni), and lead (Pb) ions from spiked deionized water and spiked leachate onto natural materials (peat A and B), by-product or waste materials (carbon-containing ash, paper pellets, pine bark, and semi-coke), and synthetic materials (based on urea-formaldehyde resins, called blue and red adsorbents) or mixtures thereof was investigated. The adsorbents that gave the highest metal removal efficiencies were peat A, a mixture of peat B and carbon-containing ash, and a mixture of peat A and blue. At an initial concentration of 5 mg/l for each metal, the removal of each species of metal ion from spiked water and spiked leachate solutions was very good (> 90%) and good (> 75%), respectively. When the initial concentration of each metal in the solutions was twenty times higher (100 mg/l), there was a noticeable decrease in the removal efficiency of Cu2+, Cd2+, and Ni2+, but not of Pb2+. Langmuir monolayer adsorption capacities, q(m), on peat A were found to be 0.57, 0.37, and 0.36 mmol/g for Pb2+, Cd2+, and Ni2+, respectively. The order of metal adsorption capacity on peat A was the same in the case of competitive multimetal adsorption conditions as it was for single-element adsorption, namely Pb2+ > Cd2+ a parts per thousand yen Ni2+. The results show that peat alone (an inexpensive adsorbent) is a good adsorbent for heavy metal ions.
Avdelning/ar
Publiceringsår
2010
Språk
Engelska
Sidor
57-65
Publikation/Tidskrift/Serie
Journal of Material Cycles and Waste Management
Volym
12
Issue
1
Dokumenttyp
Artikel i tidskrift
Förlag
Springer
Ämne
- Analytical Chemistry
Nyckelord
- Adsorption
- Peat
- Carbon-containing ash
- Leachate
Status
Published
ISBN/ISSN/Övrigt
- ISSN: 1438-4957