Meny

Du är här

Modeling for HCCI Control

Författare:
Publiceringsår: 2012
Språk: Engelska
Sidor: 283-302
Publikation/Tidskrift/Serie: Identification for Automotive Systems (Lecture Notes in Control and Information Sciences )
Volym: 418
Dokumenttyp: Konferensbidrag
Förlag: Springer

Sammanfattning

Due to the possibility of increased efficiency and reduced emissions, Homogeneous Charge Compression Ignition (HCCI) is a promising alternative to conventional internal combustion engines. Ignition timing in HCCI is highly sensitive to operating conditions and lacks direct actuation, making it a challenging subject for closed-loop control. This paper presents physics-based, control-oriented modeling of HCCI including cylinder wall temperature dynamics. The model was calibrated using experimental data from an optical engine allowing measurements of the cylinder wall temperature to be made. To further validate the model, it was calibrated against a conventional engine and linearizations of the model were used to design model predictive controllers for control of the ignition timing using the inlet valve closing and the intake temperature as control signals. The resulting control performance was experimentally evaluated in terms of response time and steady-state output variance.

Disputation

Nyckelord

  • Technology and Engineering
  • Homogeneous Charge Compression Ignition (HCCI)
  • modeling
  • parameter
  • identification
  • model predictive control

Övriga

Workshop on Identification for Automotive Systems
2010-07-15
Linz, Austria
Published
Yes
  • LCCC
  • ISSN: 0170-8643

Box 117, 221 00 LUND
Telefon 046-222 00 00 (växel)
Telefax 046-222 47 20
lu [at] lu [dot] se

Fakturaadress: Box 188, 221 00 LUND
Organisationsnummer: 202100-3211
Om webbplatsen