Topics in Machining with Industrial Robots and Optimal Control of Vehicles
Författare
Summary, in English
Two main topics are considered in this thesis: Machining with industrial robots and optimal control of road-vehicles in critical maneuvers. The motivation for research on the first subject is the need for flexible and accurate production processes employing industrial robots as their main component. The challenge to overcome here is to achieve high-accuracy machining solutions, in spite of strong process forces affecting the robot end-effector. Because of the process forces, the nonlinear dynamics of the manipulator, such as the joint compliance and backlash, significantly degrade the achieved position accuracy of the machined part. In this thesis, a macro/micro manipulator configuration is considered to the purpose of increasing the position accuracy. In particular, a model-based control architecture is developed for control of the micro manipulator. The macro/micro manipulator configuration are validated by experimental results from milling tests in aluminium. The main result is that the proposed actuator configuration, combined with
the control architecture proposed in this thesis, can be used for increasing the accuracy of industrial machining processes with robots.
The interest for research on optimal control of road-vehicles in timecritical maneuvers is mainly driven by the desire to devise improved vehicle safety systems. Primarily, the solution of an optimal control problem for a specific cost function and model configuration can provide indication of performance limits as well as inspiration for control strategies in time-critical maneuvering situations. In this thesis, a methodology for solving this kind
of problems is discussed. More specifically, vehicle and tire modeling and the optimization formulation required to get useful solutions to these problems are investigated. Simulation results are presented for different vehicle models, under varying road-surface conditions, in aggressive maneuvers, where in particular the tires are performing at their limits. The obtained results are evaluated and compared. The main conclusion here is that even simplified road-vehicle models are able to replicate behavior observed when experienced drivers are handling vehicles in time-critical maneuvers. Hence, it is plausible that the results presented in this thesis provide a basis for development of future optimization-based driver assistance technologies.
the control architecture proposed in this thesis, can be used for increasing the accuracy of industrial machining processes with robots.
The interest for research on optimal control of road-vehicles in timecritical maneuvers is mainly driven by the desire to devise improved vehicle safety systems. Primarily, the solution of an optimal control problem for a specific cost function and model configuration can provide indication of performance limits as well as inspiration for control strategies in time-critical maneuvering situations. In this thesis, a methodology for solving this kind
of problems is discussed. More specifically, vehicle and tire modeling and the optimization formulation required to get useful solutions to these problems are investigated. Simulation results are presented for different vehicle models, under varying road-surface conditions, in aggressive maneuvers, where in particular the tires are performing at their limits. The obtained results are evaluated and compared. The main conclusion here is that even simplified road-vehicle models are able to replicate behavior observed when experienced drivers are handling vehicles in time-critical maneuvers. Hence, it is plausible that the results presented in this thesis provide a basis for development of future optimization-based driver assistance technologies.
Avdelning/ar
Publiceringsår
2013
Språk
Engelska
Publikation/Tidskrift/Serie
Research Reports TFRT-3259
Fulltext
Dokumenttyp
Licentiatavhandling
Förlag
Department of Automatic Control, Lund Institute of Technology, Lund University
Ämne
- Control Engineering
Status
Published
Projekt
- ProFlexa
- COMET
- SMErobotics
- RobotLab LTH
Forskningsgrupp
- ELLIIT
Handledare
ISBN/ISSN/Övrigt
- ISSN: 0280-5316