Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools

In English

Författare

Summary, in English

In this study the cutting tool temperature that develops during rough turning of hardened cold-work tool steel is modelled on the basis of experimental data. The data obtained from a series of thermocouples, placed on a PCBN insert, into an anvil, and into a toolholder, were used as the input for the model. An inverse problem was solved, where the heat fluxes and heat transfer coefficients were computed and where the developed temperature field was reconstructed from the experimental readings. The temperature was modelled for the case of new tools, as well as for the case of its development in the course of tool wear. The machining case involved utilization of a high-cBN content and a binderless PCBN grade, both possessing high thermal conductivity of 110 and 190 W/m K respectively. (C) 2015 The Authors. Published by Elsevier B.V.

Publiceringsår

2015

Språk

Engelska

Sidor

489-495

Publikation/Tidskrift/Serie

15th CIRP Conference on Modelling of Machining Operations (15TH CMMO)

Volym

31

Dokumenttyp

Konferensbidrag

Förlag

Elsevier

Ämne

  • Materials Engineering

Nyckelord

  • Tool temperature
  • inverse problem
  • hard turning
  • PCBN

Conference name

15th CIRP Conference on Modelling of Machining Operations (CMMO)

Conference date

2015-06-11 - 2015-06-12

Conference place

Karlsruhe, Germany

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 2212-8271