Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

A Nonlinear PID Autotuning Algorithm

Författare

Summary, in English

A nonlinear autotuning regulator algorithm is obtained via a direct combination of the Åström-Hägglund algorithm for the linear case [1] with the sinusoidal-input describing function (SIDEF) approach to nonlinear compensator synthesis of Taylor and Strobel [2]. The basic approach for linear autotuning proceeds as follows: a. install a relay with hysteresis in series with the unknown plant to be controlled; close a unitygain feedback loop around this combination; b. choose several values of hysteresis so that this system exhibits limit cycles; the frequencies and amplitudes of the oscillation at the output of the plant determine points on the plant Nyquist plot; and c. given points on the plant Nyquist plot, set the PID controller gains using an appropriate tuning algorithm (e.g., Ziegler-Nichols). This approach produces good results if the plant is liner or nearly so; however, if the plant behavior is strongly amplitude-dependent, there are likely to be problems with implementing this algorithm. The nonlinear autotuning regulator algorithm which extends the above approach to handle situations where the plant behavior is strongly amplitude-dependent is based on the SIDF approach. In essence, SIDF input/output (I/O) models of the compensated nonlinear system are exploited to directly synthesize a compensator nonlinearity that eliminates or reduces the amplitude dependence of the open-loop I/O relation. The nonlinear synthesis portion of this algorithm is reasonably simple to implement, has been shown to be effective [2], and should be of practical utility. An example application to a precision position control system is provided as an illustration.

Publiceringsår

1986

Språk

Engelska

Sidor

2118-2123

Publikation/Tidskrift/Serie

Proceedings of the 1986 American Control Conference : Seattle Sheraton Hotel and Towers, Seattle, WA, June 18-20, 1986

Dokumenttyp

Konferensbidrag

Förlag

IEEE - Institute of Electrical and Electronics Engineers Inc.

Ämne

  • Control Engineering

Conference name

American Control Conference, 1986

Conference date

1986-06-18 - 1986-06-20

Conference place

Seattle, Washington, United States

Status

Published