Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Implementation and validation of an environmental feedback pool fire model based on oxygen depletion and radiative feedback in FDS

In English

Författare

Summary, in English

This paper has been aimed at implementing and validating a simplified environmental feedback fire model in FDS as a complement to more advanced pyrolysis models. The two main means of environmental feedback have been identified as the oxygen concentration close to the fuel base and the radiative feedback from the surrounding obstructions and smoke layer. The oxygen concentration at the fuel base has previously been identified to linearly influence the normalized burning rate compared to the free burning behavior; this correlation has been implemented in FDS as a simple way to compensate for the reduced radiative feedback the fuel surface receives when the oxygen concentration is lowered and the flame is cooled down, prolonged or detached from the fuel base. In large pool fires it is often considered that the net radiative heat flux to the fuel surface is the dominant factor compared to convection when determining the total mass loss rate, and in enclosed spaces the additional radiative heat flux feedback from other sources than the flame itself might be significant. To predict these environmental effects another simplified model has been implemented; the external radiative heat flux (radiative heat flux not sourced from the flames) divided by the fuel heat of vaporization is assumed to be directly proportional to the additional mass loss rate. This model is mostly needed in very hot enclosures and its effect has been limited in the cases used for validation in this paper. Overall the model produces accurate predictions of the mass loss rate as long as the overall flow is reasonably resolved by the model. The grid dependency has been observed to be relatively small even at coarse meshes which can be a benefit compared to more detailed models.

Publiceringsår

2016-10-01

Språk

Engelska

Sidor

35-49

Publikation/Tidskrift/Serie

Fire Safety Journal

Volym

85

Dokumenttyp

Artikel i tidskrift

Förlag

Elsevier

Ämne

  • Other Civil Engineering

Nyckelord

  • CFD
  • FDS
  • Fire
  • HVAC
  • Mechanical ventilation
  • Oxygen depletion
  • Pool fire
  • Radiation feedback
  • Validation

Status

Published

ISBN/ISSN/Övrigt

  • ISSN: 0379-7112