Webbläsaren som du använder stöds inte av denna webbplats. Alla versioner av Internet Explorer stöds inte längre, av oss eller Microsoft (läs mer här: * https://www.microsoft.com/en-us/microsoft-365/windows/end-of-ie-support).

Var god och använd en modern webbläsare för att ta del av denna webbplats, som t.ex. nyaste versioner av Edge, Chrome, Firefox eller Safari osv.

Experimental investigation about the influence of the use of glue in joints in lightweight structures.

In English

Författare

Summary, in English

Lightweight timber structures have many advantages, but high-demand acoustic quality is hard to achieve due to the relatively poor insulation through the junctions, especially in the low frequency range (20 Hz-200 Hz) where the weight (mass per unit of area) of a construction is an important parameter for the air-borne insulation properties. Increasing the mass would improve the insulation but this would go against the main advantage of lightweight constructions. Impact sound from a walking person is the most common sound insulation problem for these kinds of structures, where the footsteps produce a high-degree of noise disturbance. The aim of this particular investigation, however, is to show how glue modifies the sound transmission through the joints in a wooden floor. Theory shows that coupling occurs in a joint either along a line or at individual points depending on the distance between the screws or nails with regard to the bending wavelength. When a viscous elastic material as glue is inserted in between the parts of the joint, the behavior will change and it is therefore important to be studied. To achieve this aim, two structures were built. The first one constituted of two squared plates of dimension 0.6 m x 0.6 m, each one of them fixed onto one beam 4.5 m wide and 22 cm high, by means of equidistant screws. A second set-up was built too, but this time only a single 1.2 m x 0.6 m plate was fixed onto the beam. The same structures were built again a second time, but this time glue was applied around the screws on the contact surfaces.

Publiceringsår

2011

Språk

Engelska

Publikation/Tidskrift/Serie

[Host publication title missing]

Dokumenttyp

Konferensbidrag

Förlag

Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011)

Ämne

  • Fluid Mechanics and Acoustics

Nyckelord

  • Juntions
  • Timber
  • Measurements
  • Glue

Conference name

COMPDYN 2011

Conference date

2011-05-25 - 2011-05-28

Conference place

Corfu, Greece

Status

Published